tender for extention of bibipur-bellauli bundh on right bank of river saryu in district mau lot 17 - earth work in fillingby mechanical excavator0.90cum & power transport for a lead of upto 3 km including excavation loading unloading stacking machenical compaction and dressing including all lift etc including all labour, t&p, all taxes but excluding of gst etc. for proper completion of work as per direction of engineer in charge. 2 providing and laying of mzp stone boulder (25 to 40 kg minimum dimension 200mm) inmechanically woven double twisted hexagonal shaped of bis class 2 as per is code 16014 : 2024 of required sizes 3.00x1.00x0.45 m (1 no. diaphragm size 3x0.45 m along the gabion length and 2 no. diaphragms size 2x0.30 across the length of gabion) mesh type 10.00x12.00cm polymer (pvc / pa 6) coated, mesh wire dia. 2.7/3.7mm (id/od), edged/selvedge dia 3.4/4.4mm (id/od) with partitions at every 1m interval and shall have minimum 10 no. of opening per mtr. of mesh perpendicular twist tying with lacing wire of dia 2.2/3.2mm (id/od) of construction of slope pitching including all material, labour, t&p, carrage, loading, unloading, royalty all taxes but excluding gst etc. and tying with lacing wire all complete as per directions of engineer-in-charge. 3 providing and laying geo textile sheet 200 gsm woven multifilament polypropylene yarn, below pitching with pegs including preparation of surface including all material, labour, t&p and all taxes but excluding of gst etc. for completion of work as per direction of engineer - in charge. 4 providing and laying of mzp stone boulder (25 to 40 kg minimum dimension 200 mm) inslope pitching 0.225 m including all material, labour, t&p, carrage, loading, unloading, royalty all taxes but excluding gst etc. and tying with lacing wire all complete as per directions of engineer-in-charge. 5 dry brick on edge soling including preparation of sub grade and filling joints with local sand including cost of sand, labour, t&p, royalty, all taxes, but excluding gst etc. for proper completion of work as per direction engineer-in-charge. 6 supply and fixing steel flapper regulator including cost of all materials, t&p etc required for proper completion of work. 7 earth work excavation by hydrolic excavator 0.9 cum bucket capacity including 1.5m lift and all labour, t&p and all taxes but excluding of gst etc. including refilling the trench and proper disposal of excess earth as per direction of engineer-in-charge. 8 centering and shuttering for including all cost of materials,t&plabours and other accessories required for proper completion of work. 9 reinforcement including carriage, cutting, bending,and placing in position including cost of binding wire,labours,t&p etc. all complete. 10 providing & laying p.c.c. work in 1:2:4 ( m15) coarse sandand dala grit (12.5mm to 20 mm.)for rcc regulator including all cost of materials,t&p and labours and other accessories required for proper completion of work, excluding cost of reinforcement.in the direction of engineer-in-charge as per drawing and i.d. specification. 11 providing & laying r.c.c. work in 1:1.5:3 ( m20) coarse sandand dala grit (12.5mm to 20 mm.)for rcc regulator including all cost of materials,t&p and labours and other accessories required for proper completion of work, excluding cost of reinforcement.in the direction of engineer-in-charge as per drawing and i.d. specification. 12 providing & laying r.c.c. work in 1:1:2 ( m25) coarse sandand dala grit (12.5mm to 20mm.)for rcc regulator including all cost of materials,t&p and labours and other accessories required for proper completion of work, excluding cost of reinforcement.in the direction of engineer-in-charge as per drawing and i.d. specification. 13 supplying and laying pvc pipe in abutment and wing wall 75 mm dia including material, labour,t&petc. complete work directed by engineer-in-charge. 14 supply and fixing of steel gate includingcost of allmaterial, labour,t&petc