procurement of container mcf procurement of container mc , procurement of container mcf , procurement of container mcf1.make of container: high corrosion-resistant corrugated steel sheets 2.minimum thickness of sheet: 1.6mm to 2mm 3.size of container: length – 20 feet, width – 7 to 8 feet, height – 7 to 8 feet 4.door with a locking system to be provided at one end of the container 5.ventilation covered with wire mesh net (3mm diameter at c/c 1-inch gap) and an exterior metal sunshade to be provided at 2 longer sides of the container 6.painting: the whole container is to be painted with marine quality paint (inside and outside), primary colour and design could be finalized after discussion with officials 7.tare weight: 2.3 ton to 2.5 ton 8.bottom floor lining should be provided with chequered marine grade plywood of minimum 12mm thick 9.hooks to be provided for the transportation of the containers: 4 nos 10.the container should be placed on a metal platform of height 60cm and should be provided with a ramp of slope 1 in 12 at the opening side of the door 11.the bidder should carry out comprehensive maintenance of the container for 3 years after a warranty period of 1 year without any additional cost 12.material test certificates should be obtained from govt labs / nabl-accredited labs 13.the selected bidder should transport and place the container within 30 days from the award date of a bid at the sites within the municipality area without any extra cost 14.the rate should be quoted inclusive of taxes