supply-delivery of different spare parts including repairing of associated truck of existing mobile water treatment unit at ganga sagar under south 24 mechanical division p.h.e. dte.-2 dismantling of the whole water treatment plant unit from the truck and thereafter installation and commissioning of the whole water treatment plant including change of pipelines of 1 ½’ cvpcpipes of quantity100 ft approx including replacement of valve and repairing of the skid etc as per full satisfaction of the eic to get the production of 4000 pouches perhour 3 repairing of the whole body of the truck including the base of the body to be replace by ms plate of minimum 5 mm thickness to accommodate the new generator and water treatment plant inside of the truck including complete paint and polishing of the whole body of the mtu and write the matter on all the four side of the truck including supply of the materials as per existing design and as per direction of eic 4 supply and delivery at site ss micron cartridge filter/busket strainer for uf unit-100 micron ss, 20 long(jumbo type)id - 50mm od - 100mm length - 500mm flow capacity - 6 m3/hr construction, core not required.clean dp - 100 mbar maximum operating temperature - 200 deg c make :- gopanipreferably of equivalent. /approved vendor of phed 5 supply and delivery at site 5 micronjumbo wond type pre filter cartridge of r.o filter assembly with below mention specification.a) id:- 4.5 b) o.d :- 6c) length :- 20 d) flow capacity :- 5m³/hre) care cover material:- poly propylenem f) care :- poly propylenem g) clean ps 10 psid h) maximum operating temperature :- 120°f (49°c)make :- parker preferably of equivalent./approved vendor of phed 6 servicing, repairing and over hauling of truck engine including supply of necessary materials complete as per satisfaction of eic. 7 supply , delivery , installation and commission of r.o. pressure tube with end cap 8040 side port typemake-approved vendor of phed 8 repairing of clutch plate , electrical , break, fuel , strainer wheel, sbsrepairing along with materials testing checking and labour charges 9 supply& delivery of following spare for pouch packing machine: [ make- as per approved vendor of phed] 10 supply and delivery of plc unit for pouch packing machine 11 supply and delivery of digital controller as per departmental sample (push button type) 12 supply and delivery of control transformer 13 supply and delivery of horizontal transformer 14 supply and delivery of vertical transformer 15 supply and delivery of roller adjustable spring 16 supply and delivery of horizontal &vertical electrode, l = 190 mm 17 supply & delivery of teflon tape (18 x 300 mm imported) 18 supply and delivery of jog & rod for truck 19 supply and delivery oftool range set ( all the tools which are required for mtc.)