supply materials for mtc of campus out door led street light fittings in the campus of govt general degree college chapra supply materials for mtc of campus out door led street light fittings in the campus of govt general degree college chapra nadia supply and fixing of 70w led outdoor light/ street light (crompton) [cat.no.-trp-409-70-57-sl-gl-nsg] 2 supply of led 9 w bulb . [crompton make] 3 supply only single led tube light fitting in (cat.no.-igp161lt8-16 1 x t8) [crompton make] 4 supply of led t8 tube light with pc body (cat.no.-lt8-20-865-2. [crompton make] 5 supply & delivery of 36w flurecent tube light. (philips) 6 supply 240 v, 25 a, modular type starter (northeast) 7 supply of pvc tape. 8 supply of 220v pendent holder. 9 supply of electronic choke (philips make). 10 supply of 1.5 sq mm flexible pvc insulated copper wire (make- finolex) 11 supply of fan condenser (philips make). 12 s&d at site of 4 core xlpe insulated & sheathed armoured aluminium condctor cables for working voltage up to 1.1 kv grade of following sizes [make - havells / gloster / kei / polycab / rr kable] 13 i) 4 core 6 sqmm 14 laying of one no. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) nos. bricks per meter, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed [1(a)/f-2] 15 laying of cable as below, after cutting floor/pavement/wall/and making holes incl, embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish. as per gs [5(i)/f-3] 16 i) from 2.5 sqmm to 35 sqmm at an average depth 75 mm in floor/pavement/wall etc as per gs 17 supplying & fixing mending gauge gi pipe (isi-medium) pritection with necessary fittings and jointing meterials as required a) 25 mm dia [122/k-3] 18 supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of pvc armoured cables as below as to g.s. 19 a) 4 core x 6 sq.mm [7(c)/f-4] 20 finishing the wnd of following xlpe/pvc armoured cables by crimping method incl. s&f solderless socket etc as per gs 21 a) 4 core x 6 sq.mm [8(b)-x / f-5] 22 supply 240v, fan regulator (step type) (brand approved by eic) (size : small & big).