tender for internal road of pwd colony fatehpur - providing, laying, spreading and compacting stone aggregates of specific sizes 22.4-53 mm kabrai quarry gauge to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. complete as per mort&h specification clause 404.including labour cess. gst shall be paid extra as applicable at the time of payment. 2 providing and applying tack coat with bitumen vg-10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. as per mort&h si-503. including bitumen& labour cess. gst shall be paid extra as applicable at the time of payment. 3 providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregatesusing viscocity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity not less than 200 tonnes/hour, laying and rolling with a smooth wheeled roller, finished to required level and grades.as per mort&h clause 510. including royality on materials & cost of bitumen, labour cess . gst shall be paid extra as applicable at the time of payment. 4 providing and laying of premix sand seal coat type b with hmp of appropriate capacity not less than 200 tonnes/ hours using crushed stone chipping 6.7 mm size and penetration bitumen of suitable grade.as per mort&h clause 511. including royality on materials & cost of bitumen, labour cess . gst shall be paid extra as applicable at the time of payment. 5 construction of embankment with approved material obtained from right of way with all lifts and leads, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-2. (without tippers) as per mort&h si-305. including labour cess. gst shall be paid extra as applicable at the time of payment. 6 providing & laying of hot applied thermoplastic compound 2.5 mm thick including rectrorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is inclusive of surface applied glass beads as per irc:35.the finished surface to be level, uniform and free form streaks and holes. rates to be inclusive of all taxes, royalty, vat etc and all t&p / machine material and labour required for proper completion of work. (mort & h no 803). including labour cess. gst shall be paid extra as applicable at the time of payment.