tender for 146/06 mgnrega -nlpgp- 2024-25 - ward 06 supply mterial for works , hire charges of concrete mixer 0.25 to 0.40 cum with hopper , vibrator (needle type 40 mm) , stone aggregate(single size): 40 mm nominal size , stone aggregate(single size):20 mm nominal size , stone aggregate(single size): 10 mm nominal size , safeda ballies 125 mm diameter , portland cement , bright finished or black enameled mild steel butt hinges 100x58x1.90 mm , bright finished or black enameled mild steel screws 40 mm , coarse sand (zone iii) , fine sand (zone iv) , twisted steel/deformed bars , structural steel such as tees, angles, channels and r.s. joists , galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots , galvanised steel j or l hooks 8 mm dia , bolts and nuts up to 300 mm in length , stone for masonry work , second class kail wood in scantling , second class kail wood in planks , g.i limpet washer , bitumen washer , welding by electric plant , wire nails , diesel oil , g.i pipes 50 mm dia , mild steel tubes hot finished welded type , red oxide zinc chromate primer , white vitreous china 10 lit. (full flush) capacity controlled low level flushing cistern with all fittings , wall form panel 1250x500 mm , corner angle 45x45x5 mm 1.50 m long , 100 mm channel shoulder 2.5 m long , double clip (bridge clip) , single clip , m.s. tube 40 mm dia , adjustable span eso+si (2.35-3.40) , adjustable telescopic prop 3 m (2.02-3.75m) , multi surface paint , metal primer (u.g.) , water proof ply 12 mm thick , mangalore ridge tiles 20 mm thick , mangalore tiles 20 mm thcik , precoated galvanised steel plain ridges , hire charge of 5 hp engine and pump set , gi trafford profile sheet 0.35mm thick , galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm , 200 mm aluminium aldrop , solid blocks of size 30x20x15cm , pvc pipe 20 mm outer dia 10 kfg/cm2 , 75mm dia pvc pipe working pressure 4kg per sq.cm , quarry waste