supply of pillow block ball bearing, square flange ball bearing & pillow block bearing. (3 items).pillow block ball bearing, square flange ball bearing & pillow block bearing. (3 items).,pillow block ball bearing , ucp 208 to suit 40mm dia shaft. 1) width of the in ner ring - 49.2mm 2) no of bolt holes - 02 nos 3) fixing bolt diameter - m12 4) shaft atta chment - set screws. 5) type of seal - trident triple lip rubbing seal on both sides. 6) bearing housing material - cast iron 7) bearing insert material - chrome steel 8) mas s of the bearing unit - 2kg approx make: ntn / fag / timken / ina / skf special conditions : 1. material must be supplied with tamper proof seal. 2. only oem or authorized distributors with valid adc ar e eligible to quote. 3. warranty - 12 months from the date of delivery / 09 months from the date of fitment whi ch ever is early. [ warranty period: 12 months after the date of delivery ] , square flange ball bearing ucf - 210 to suit 50mm shaft. 1) outer diameter e of the inner race - 62.1mm 2) width of housing - 39.5mm 3) width of inner ring - 51.6mm 4) top external diamtere - 115mm 5) distance between attachment bolts - 111mm 6) ove r all length of one side of the square flange - 143mm 7) diamter of the attachment b olt hole - 16mm 8) mass of one bearing unit - 2.4kg approx. 9) housing material - cast i ron 10) seal and flinger - on both side. with minimum two set grub screw locking of g2 m10 x 1.25mm arrangement. make: skf / ntn / timken /ina / fag only special condition s: 1. material must be supplied with tamper proof seal. 2. warranty - 12 months from the date of delivery / 0 9 months from the date of fitment which ever is early. 3. oem or authorized distributors with valid adc are only eligible to quote. [ warranty period: 12 months after the date of delivery ] , pillow block bearing with cage assembly no. ucp 216 to suit 80mm shaft. 1) center distance between bolt holds - 232mm. 2) total bearing width - 82.6mm. 3) shoul der dia of inner