supply of supply of fastener set for shock absorbersupply of fastener set for shock absorber,fastener set for shock absorber mounting-wdg3a & w0/130 locos connsisting of the following 4 it ems: . a). hex. headed ht.rolled threaded bolt m 22 x 2.5 x 130 mm long with thread length of 50 %b1 10 mm and 5 mm dia, hole drilled at 10 mm from the tail end of the bolt for providing a split pin, confirming to is: 1367, p roperty class-10.9. b). castle nut size of m 22, .confirming to is: 1367, property class- 8.0, c). plai n washer 3 mm thick suita8le for m 22 bolt confirming to is: 2016 table 2 and d). ms split pi n of 4 mm dia x 50 mm long confirming to is: 549. the following brands/make will only be considered ,lps /tvs /lps bossard /dfl/jbm /pioneer /boltmaster /bimco note: 1. test procedure for quality c ontrol of the fastener shall be done as per the dlw spec. no. misc-109 %b7dated 6-12-2003 with aql 2.5 2. bo lt embossed with manufacturers identification code with material property grade on the bolt head face will only be considered. 3. offer quoting the brand name of their offer along with copy of valid dealership certificate issued by their principals only will be considered. [ warranty period: 30 months after the date of delivery ] => limited