supply of igbt based plasma air cutting machine with reciprocating type air compressor governed by 2 hp single phase motor used for cutting all type of metals like ms, ss, brass, copper and aluminum. max open circuit voltage 280-320. current rating of power source as well as cutting torch in 100% & 60% duty cycle sho uld be 300 amp & 150 amp respectively. material removing rate should be 20 kg / hr. current range 10-40 amp . forced air cooling ( min. of 5 kg / cm2 flow rate ) , hand held based torch with on / off switch ( min. clean cut thickness should be 12 mm ) having a cutting speed of 100 mm / min. input supply 415v+ / -10 , 3ph, 50 / 60hz, tan k capacity of min.100 liters. pressure must be in between 6-10 bars. protection class of min ip-23. length of to rch cable 7600 mm. weight of the machine should not be more than 30 kg. items to be supplied:- input copper c able for connecting power source to main supply - 05 no?s, work connecting cable with earth clamp - 01 no, air hose with accessories - 01 no, air filter cum regulator - 01 no, consumable spares: a ) electrodes & tip - 25 set each, consumable spares: b ) .outer nozzle - 25 no?s, black glass goggles confirming to 4 din specially used for plasma cutting machine ? 05 no?s, 01 set of tool box for day to day maintenance work for plasma cutting m achine and air compressor, fire proof dress ? 2 no?s, cnc interface, metallic storage case for torch and cabl es, operating and instruction manuals, hand gloves ? 10 no?s, availability of type test report covering compl ete test parameters from any ilac / nabl accredited / central govt. lab. minimum of 02 years warranty require d. installation and demonstration to be done. machine shall comply with all electrical safety regulations for machi ne / operators. make / brand: esab, jk, ador, d&h, master. [ warranty period: 24 months after the date of delivery ]