supply of electronic torque wrench testerelectronic torque wrench tester,electronic torque wrench tester : supply , installation and commissioning of electronic torque tester suitable for 3/8 inch, 1/2 inch, 1inch square drive torque wrenches to test, display unit with connecting cable mounting arrangement along with soft ware for transferring reading to pc for documentation with square drive adopters with calibration certificate. specification:- (1) holde r: holder (2) display unit: digital indicatormicroprocessor controller board (3) range of torque tester-05 nm to 1000nm (4) least c ount:0.5 nm (5) tripod: tripod for display unit (with1.5 m cable) (6)mains adopter: mains adopter (110v-230v) with interchangeabl e socket adopter or direct connection to 12v-i n car supply is possible.(7) square drive adopter : square drive adopter (all the nece ssary adopter for the mentioned capacity torque wrenches in description) (8) kit :kit for attaching the unit to a workbench of wall in a horizontal or vertical testing positioning for clockwise and anticlockwise use.(9) unit ofmeasurements: n-m, ft-lb, in-lb.(10) intercha ngeable: interchangeable transducer that can be attached to the holder by means of a quick release safety lock.(11) software inclu ding :software including usb hub and jack cable , which enables readings to be the pcfor documenting purpose.(12) to be packed : to be packed and supplied in sturdy plastic case.(13) operation volt: 230v ac +/- 10%,50 hz+/- 2%,1 ph (14)weight:12-15 kg ap prox. make /brand:- hmm-hytech, model-dt-it-m or similar. offered make:- hmm-hytech model : dt 1t-m [ warr anty period: 12 months after the date of delivery ]