sitc of laboratory fume hood supply installation and commissioning of laboratory fume hood and exhaust systems , fumehood and accessories : , pp cupsink 3x6x4 , fumehood microprocessor based airflow monitor and alarm -vertical - c/w sm7 sensor, suitable power adaptor , rear scribe-18hx00dx5l, h=height up to false ceiling , rear scribe-35hx00dx18l , rear scribe - 57hx00dx05l , base molding 4 ft. , fumehood electrical system-2+2 nos 6/16a sockets with switch, 1 no 4ft non-flame proof light fixture along with led & 15 intensity with 3 color settings control switch, 1 no fumehood db and internal wiring within the hood , fumehood front control valve for compressed air , fumehood front control valve for nitrogen , front control valve for raw water , fumehood front control valve for vacuum , fumehood ss304 internal tubing until 150mm above the hood with capped end (1/2 for rw, va, 1/2 with insulation cwi, cwo, 1/4 for n2, ca) , base unit fh solvent 2 door-35hx22dx36l , base unit fh acid 2 door-35hx22dx36l , floor standing worktop support of size:36hx08l , 6 feet benchtop hood, combination sash, sash opening 28, 30 internal depth, 72 length, phenolic resin liner, with insert type worktop , 6 ft fumehood ceiling enclosure with access door, size:18h x 30d x 72l, cf=for combination sash hood, h=height up to false ceiling , epoxy lattice assmbly for 6’ benchtop fumehood , 6 feet bench top fumehood insert type granite worktop. , centrifugal blowers and motor:- medium pressure direct driven pp centrifugal blower cmveco315/280 (1600-2600cfm @ 30-140mm static), with clamp adapter, electro galvanized stand base frame and fasteners. refer cluster details. , g1 m8x50 bolts with nuts & washer (motor and blower pedestal) , vibration isolators for cmmv-315/280 , m10x100 pin type anchor fasteners , motor 3.7kw/2p(5hp/2p) tefc b5/flange mounted 3phase 50hz, ie2.terminal box should be on top side. motor shall be compatible for vfd operation. refer cluster details. , pp weather cowl dia 350 mm. (1.48 sqm). , ms stack support for cmveco-315/280 model, (kg: - 90 kgs ). , motor guard with accessories for 5hp, refer motor capacity. , 25x25x14g thk pp bird mesh for dia 250 mm bypass end connection, refer drawing. , dia 315 mm and 3mm thickness pvc transparent flexible connection for inlet & outlet of the blower, refer cluster details. , pp-frp ducting and accessories - pp-frp ducting using 3mm thick ppgl sheets 3 mm thick frp lining using isothelic resin including flanges & bends, gasket, support with threaded rod, clamps, anchor fasteners, washer nuts and bolts and uv resistant painting. , ms support for ducts like threded rod,anchor bolts,c-chanels, clamps,angles,bolts & nuts. inside lab, within shaft & outside the building. , pp moulded 300mm dia. single leaf butterfly manual damper with both side flanges.refer drawing. , pp moulded 250mm dia. single leaf butterfly manual damper with both side flanges.refer drawing. , fumehood base cabinet vent connection & accessories , 40 mm pp slip x slip x slip tee , 40mm cts slip x mpt male adapter 2 with chuck nut , 40mm cts 90-degree slip x slip elbow , 40mm. x 3000mm pp exhaust pipe