supply of tungsten carbide tamping toolstungsten carbide tamping tools,tungsten carbide tamping tools (tctt) for old csm / wst as per rdso specifica tion no.tm/hm/6/320 -rev-3 (july-2019) & rdso drawing no. details of drawing no.and qty of one set as under. 1-tungsten carbide tamping tool (tctt) as per drawing no. rdso/tm/14a/1 6=16 nos & equivalent to plasser part no. cu30-4020be-fr-i(16 nos in a set) 2- tungsten carbi de tamping tool (tctt) as per drawing no. rdso/tm/14b/16 = 04 nos & equivalent to plasser p art no. cu30-4020be-frii (04nos in a set) 3- tungsten carbide tamping tool (tctt) as per draw ing no. rdso/tm/14c/16-= 04 nos equivalent to plasser part no. cu30-4020be-fr-iii(04 nos in a set) 4- tungsten carbide tamping tool as per drawing no. rdso/tm/14d/16 = 08 nos equivale nt to plasser part no. cu30-4020be-fr-iv(08nos in aset) detailed specifications as per annex ure-i for old csm, old duo machines. part make: plasser or equivalent, note: the necessary test cer tificate to be submitted by supplier along with supply of material. note: material supplied by firm should be fitted on machine without any modifications. warranty: 2,50,000 insertions (approx 300 kms of tamp ing) or 18 months from the date of fitment or 30 months from the date of supply, whichever is later, for an y manufacturing defects. if a tool fails before minimum service life of 50000 insertions, the firm should rep lace it free of cost. ] , set of modified tungsten carbide tamping tool set for csm 09-32. one set consi sting of 32 nos. tools of following items:- (i) modified carbide tamping tool equivalent to plasser part no. cu-30-10840-fr-i= 08 nos. (ii) modified carbide tamping tool equivalent to p lasser part no. cu-30-10840-fr-ii= 08 nos. (iii) modified carbide tamping tool equivalent to pl asser part no. cu-30- 10840-fr-iii= 08 nos. (iv) modified carbide tamping tool equivalent to p lasser part no. cu-30-10840-fr-iv= 08 nos. as per rdso drawing no. rdso/tm/15a/16 , rdso/tm/ 15b/16, r