special repair of main items at judicial court complex, malout-2 dismentling glazed tiles (to be carefully removed) 3 scraping cement plaster. 4 12.5 mm thick cement sand plaster 1:5 5 removing doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. doors of area 3 sqm and below 6 deodar wood chowkhats including iron hold fasts iron hinges corner straps clears, stops wooden knobs fixed in position. single rebate (60mmx100mm) 7 painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. 8 factory manufactured solid flush door fixed in position hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position cost : is2202-1(1999) commercial with elm or gurjan facing on both/sides with laminated core and lipped edges. 35 mm thick. 9 applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface. 10 finishing wall with exterior decorative cement based on water soluble paint such as snowcem, robbiacem etc. two or more coats to give an even shade. 11 preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete. 12 distempering with acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade. 13 precast chequred tiles of 20mm minimum thickness in ordinary grey cement without chips laid on 20mm thick bed of cement mortar 1:3 (1 cement 3 sand) with neat cement slurry between joints and over the base for floors, treads of steps and landings. 14 finishing walls with textured exterior paint of required shade with two or more coats applied@ 3.28 litre/10 sqm over and including base coat of water proofing cement paint [email protected] kg/10 sqm. 15 providing & fixing glass panes with nails and putty or wooden strip complete in all respect. glazing area above 0.09 sqm. 4mm thick or 10.78 kg/ sqm. 16 cost of aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (excluding sliding bolt). for shutter area above 0.50 sqm. 17 credit of doors with chawkhats 18 public health 19 providing, installing, testing & commissioning of air conditioners split casting 1.5 tone-5star invertor technologycapacity units including suitable copper pipe, waste pipe, angle frames / stand with outdooretc. of reputed make such as carrier /voltas complete in all respects. 20 credit of old material 21 indoor unit 1.50/ 2.00 ton 22 outdoor unit 1.50/ 2.00 ton