tender for lucknow etawah road to vishdhan via kureh road. - providing, laying, spreading and compacting graded stone aggregate to wet mix macadam with 1% cement and 3.50% emulsion ss-2 specification including premixing the material with water at omc in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. as per technical specification clause no. 406. 2 providing and applying tack coat with bitumen vg-10 using bitumen pressure distributor at the rate of 0.20 kg. per square metres on the prepared bitumenous / granuler surface cleaned with mechanical broom. as per technical specification clause no. 503. 3 providing and laying bituminous concrete with120 tph capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4per centof mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 507 complete in all respects (grading-ii) (with bitumen vg-30) (exlusing cost of gst) (including cost of bitumen) 4 construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table no. 300-2