tender for supply of material for undapara vardil 108-no anganwadi kattida nirmanam- 1 stone aggregate(single size): 40 mm nominal size 2 stone aggregate(single size):20 mm nominal size 3 carriage of stone aggregate 40 mm nominal size and above 4 carriage of stone aggregate below 40 mm nominal size 5 coarse sand (zone iii) 6 carriage of coarse sand 7 portland cement 8 carriage of cement 9 hire charges of concrete mixer 0.25 to 0.40 cum with hopper 10 vibrator (needle type 40 mm) 11 sundries 12 stone for masonry work 13 twisted steel/deformed bars 14 carriage of steel 15 stone aggregate(single size): 10 mm nominal size 16 royalty for good earth 17 carriage of good earth 18 solid blocks of size 40x20x20cm 19 cement 20 coarse sand 21 structural steel such as tees, angles, channels and r.s. joists 22 steel 23 red oxide zinc chromate primer 24 carriage 25 adjustable span eso+si (2.35-3.40) 26 adjustable telescopic prop 3 m (2.02-3.75m) 27 second class kail wood in planks 28 second class kail wood in scantling 29 hollock ballies 125 mm diameter 30 carriage of timber 31 beam clamp 300-380 mm (450-1070 mm) 32 fine sand (zone iv) 33 fine sand (1 part badarpur sand : 2 parts jamuna sand 34 mild steel round bar above 12 mm dia 35 flats up to 10 mm in thickness 36 anjili wood scantls 37 bright finished or black enameled mild steel butt hinges 100x58x1.90 mm 38 bright finished or black enameled mild steel butt hinges 50x37x1.50 mm 39 bright finished or black enameled mild steel screws 40 mm 40 bright finished or black enameled mild steel screws 20 mm