providing furniture renovation to krushi vibhag in zilla parishad dharashiv- 1 item no.1:-providing and fixing full height laminated partition 76mm. thick made upto of 18mm. thick plywood 2x50 mm. width frame work at 0.60 x 0.60 meter center to center and both face covered with century make bwr grade (isi-303) mark commertial ply or equivalent approved make 12mm. thick bwr grade (isi-303) mark commertial ply ply treated with antitermite treatment and both side finish with 1.00 mm. thick laminet confirming to (isi 2046) and8mm. thick clear glass as per architectural design and drawing including all materials, hardware, labours and as directed by engineer in charge etc. complete.rate as per sanctioned by s.e. b & c complete 2 item no.2: providing and fixing low height storage laminate having depth 0.45 m. made up of century make bwr grade (isi-303) mark commertial ply or equvalent make 18mm. thick plywood for frame work shelves, shutters and back with 12mm. thick plywood as per architectural design and drawing and finish with 1.00 mm. thick laminate royal touch make confirming to (isi 2046) or equvelant make and inside surface finish with french polish, including t.w. lipping, 75mm. bars hinges, bras screws, ss 304 grade handal, enox or equvelent drawer lock, 100mm. brass tower bolt, magnet, melamine polish two moulding / lipping antitermite treatment to plywood, and as directed by engineer in charge etc. rate as per sanctioned by s.e. b & c complete 3 item no.3: providing and fixing staff table having size of 1.35 x 0.60 x 0.75 made upto centurt make mwr grade (isi-303 ) mark commercial ply or equivalent make with pedisal made up of 18mm. and 12mm. plywood as per approved drawing with enox 400 mm. chanells for key board and 600mm. chanells for drawer sliders and using w hinges for shutter to be fixed with magnet s.s. door chain,handles 100mm. enox edrawer lock and finished with 1.00mm. thick etc. rate as per sanctioned by s.e. b & c. 4 item no.4: providing and arrangement of mid back, eco cts mechanism, fixed armrest, gaslift for seat height adjustment, standard 5-prong p/nylon base with fabric upholstery addn. spec. as directed by engineer in charge (ssr 22-23 it.no.51.43) 5 item no.5: providing and fixing shutter to wall cupboard made from 19 mm thick teak particle board with approved coloured laminated face 1.5 mm thick bonded with phenol formaldehyde synthetic resin b.w.p. grade including lipping beading iron oxidised fixtures and fastening and oil primer coat etc. complete. (excluding cupboard frame). addn.spec. no.as directed by engineer in charge. (ssr 22-23 it.no.37.21) 6 item no.6:-providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface. (excluding the primer coat)etc. complete. addn.spec. no.bd.p.6 page one number 414 (ssr 22-23 it.no.36.12 )