tender for dr b c roy pgips hospital emergent works of aluminium windows and grills at several wards at phoolbagan campus during the year 24 25- 1 supplying profiles of required section made of aluminium alloyextrusions conforming to is: 732-1983 and is: 1285- 1975; annodized(with required film thickness and specified colour / natural) matt finished conforming to is: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any isi embossed / certified make and brand as per direction of engineer - in-charge. (payment will be made on finished length of the work). (a) in 10-12 micron thickness annodizing film i) natural white a) 2- track sliding window i) bottom frame 2 ii) top and side frame. 3 b) 3- track sliding window i) bottom frame 4 ii) top and side frame. 5 d) shutter for all track sliding window.i) bottom & top member. 6 ii) style side member. 7 iii) interlock member 8 g) fixed glazing.i) top, bottom and side member 9 ii) mullion 10 iii) glazing clip. 11 supplying maruti lock (100mm) 12 supplying epdm gusket of approved make and brand as per direction of engineer in charge. i) for sliding windows b) u shaped epdm gasket for frames. 13 labour charge for fabrication and installation of composite door,window, partitions made from annodized extruded alloy aluminiumsections for the following units:- (a) glazed aluminium sliding windows made of extruded and annodized alloy aluminium sectios, fabrications, including cutting to proper shape and size, drilling and aligning of window shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joineries along with extruded neoprine or epdm gasketing in between window frame and masonry work (walls, column, beam.lintels etc.) as well as between glass and shutter frame for fixing glass and polysulphide sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of eic. the rate includes the hire charge of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. but excluding the cost of extruded aluminium sections, glass, neoprene / epdm gasket, locking arrangement and rollers. i ) 2 track sliding window. gr. floor 14 1st floor 15 2nd floor 16 ii ) 3 /4 track sliding window.gr. floor 17 1st floor 18 2nd floor 19 iv ) fixed glazing.gr. floor 20 1st floor 21 2nd floor 22 (a) m.s.or w.i. ornamental grill of approved design jointscontinuously welded with m.s, w.i. flats and bars of windows,railing etc. fitted and fixed with necessary screws and lugs in groundfloor. (add extra @ 1% for each addl. floor upto 4th floor and @ 1.25% for each addl. floor above 4th floor) (i) grill weighing above 10 kg./sq.mtr and up to 16 kg./sq. mtr. gr. floor 23 1st floor 24 (a) priming one coat on steel or other metal surface with synthetic oilbound primer of approved quality including smoothening surfaces by sand papering etc. 25 (a) painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) on steel or other metal surface : with super gloss (hi-gloss) - (iv) two coats (with any shade except white) 26 supplying bubble free float glass of approved make and brandconforming to is: 2835-1987. i) 4mm thick clear glass.