vadipatti town panchayat supply and fixing new led street lights in ward no. 1 to 18 in vadipatti town panchayat, 15th finance commission grant (untied1st installment) 2023-2024 , supply and fixing , supply and deliveryof 20 watts led street light fitting in the existing eb pole system made of pressure die cast aluminumhousing with heat resistant toughened glass cover confirming the following standards iec60598 & is:10322 for luminaries iec62262 for protection of housing ip65 & ik07 ,iec61000 (4-5) for internal surge protection of minimum 5kv and external spd of 10kv and electronic driver with cct ( correlated colour temperature ) is cool white above 5000k, heat sink temperature should not more than 20c for 48hrs.contineous operation to withstand 440v protection for 48hrs hv protection & lv protection with short circuit protection and open circuit protection , life of lamps-5000hrs with warranty 1year and 100 lumensper watt with submitting of nabl testing and calibration certificates for luminary , supply and deliveryof 40watts led street light fitting in the existing eb pole system made of pressure die cast aluminumhousing with heat resistant toughened glass cover confirming the following standards iec60598 & is:10322 for luminaries iec62262 for protection of housing ip65 & ik07 ,iec61000 (4-5) for internal surge protection of minimum 5kv and external spd of 10kv and electronic driver with cct ( correlated colour temperature ) is cool white above 5000k, heat sink temperature should not more than 20c for 48hrs.contineous operation to withstand 440v protection for 48hrs hv protection & lv protection with short circuit protection and open circuit protection , life of lamps-5000hrs with warranty 1year and 100 lumensper watt with submitting of nabl testing and calibration certificates for luminary , supply and delivery of 1.50meter length , 32mm dia gi pipe bracketsuitable for the led fittings for 20w and 40w with 2 sets of clamps made up of ms flat size 32mm x 6 mm with galvanization. cutting and bending of pipeasrequired angle suitable for eb rcc/tubular/ rail poles including necessary boltsand nuts as per department engineer instructions , fixing of 20 w and 40 w led fittings with necessary gi pipe and clamp sets in eb poles including all labour charges and transport charges etc., complete , supply, delivery and installation of 3 core 1.50 sqmm copper cable with length of 3 m and 2 nos of bimetal hook connector in one end and ip 66 frmale connector in other end suitable to connect male connector in led fittings as per technical specifications , supply , delivery and installation of external surge protector device of 10 kv/5 ka with male and female ip 66 connectors as per technical specifications (except 20 w led) , supply and fixing of 32a dp switch of 500v with metal clad with fuse and neutral (side handle) on suitable tw boardwith pwd earthing (sd 143) , supply and fixing of 63 amps porcelain fuse unit (500 v) as per technical specification , supply and run of 2 of 6 sq.mm. (84 / 0.3) pvc insulated sc unsheathed copper conductor of 1100v on 7 / 20 gibearer wire for service connection mains as per technical specification (sd no.66) , supply and delivery of ms kiosk of size 0.75m x 0.45m x 0.75m made up of ms angle of size 50mm x 50mmx 4mm alround covered with 16 gauge ms sheet and kiosk door made up of ms plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc., complete