tender for estimate for installation of 1x63kva addl. dtr in village pemat under raisen (r) d/c of onm dn. raisen. - 1 back filling of poles with boulders. 2 bi-metallic clamps suitable for 12mm dia stud and 80sqmm aaac 3 bi-metallic clamps distribution transformers bushing 4 l.t. distribution box with isolator on incoming with hrc fuse for 63 kva dtr (200 amp. isolator & 6 sp of 60 amp.) 5 three phase static energy meters 20-80 amps.with l.s. & tod facility with box 6 single phase service connection box (deep drwan metal service connection boxes )with one incoming up to 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector- 7 anti climbing devices ( barbed wire 2.24 mm dia, 14 swg) 8 stay wire 7/3.15 mm.(7/10 swg) 9 g.i.pipe 40 mm dia c grade type 10 earthing coil of 115 turns of 50 mm.dia and 2.5 mtr. lead of 4.0 mm g.i wire 11 galvanized nut & bolt with washer 12 earthing for pcc pole 4.00 mm-8 swg g.i wire- 0.8 kg, per pole 13 m.s.nuts with bolts 14 lt a.b cable tension clamps (galvanized) 15 lt a b cable suspension clamps (galvanized) 16 clamps for neutral for ab cable 17 piercing connector type-i for single/three phase (main 16-50 sqmm tap-off 16-50 sqmm) 18 piercing connector type-ii (main 16-50 sqmm tap-off 16-50 sqmm) 19 clamp for 140 kg pcc pole ms flat 50x6 mm 20 stay set complete without stay wire 16 mm. (painted) 21 danger boards enamelled 11 kv 22 stay insulators 90x65mm 23 concreting of stay (16 mm / 12 mm) @ 0.2 cmt. per stay 24 complete jumpering of dtr 25 concreting of structures & foundation (1:3:6) 26 g.i. strip 25x3 mm1 27 stone block/pre cast block for base pedding(450x450x75mm) 28 bentonite compound powder 29 gst on material @ 18 % 30 labour charges including gst @ 18% 31 transportation charges including gst @ 5%