tender for certain repair to drainage compound wall, fencing and allied services in sector 28,29,30 and rcma at chandigarh. ; 1 material and labour in replacement of precast rcc cover slab 1:2:4)type b1(for man holes, drain cover etc) (using 20mm graded stone aggregates) including necessary use and waste of formwork and set in cm 1:6 complete with joints to match complete all as specified and directed 2 material and labour tmt bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hooping for columns, plinth band, lintels etc hooking ends and binding with a including mild steel wire (annealed) not less than 0.90mm dia or securing with clips quality conforming complete all as specified and directed. 3 demolition of cement concrete (un-reinforced) in ground floor, any thickness (below or above ground level) complete all as specified and directed. 4 material and labour for 75 mm thick cement concrete type c2, 1:3:6 (40mm graded stone aggregate) as in sub base of flooring complete all as specified and directed. 5 material and labour forpcc chequered tiles with grey cement and pigment 30cmx30cmx22-25mm thick set & jointed in neat cement slurry as in path, pavement, floors, etc over and including 20mm thick screed bed cm (1:6) complete all as specified and directed. 6 material and labour for machine pressed precast concrete pre- polished glossy as per sample kept in ge office finish colour interlocking paver block any shape and any sizeconfirming to is-15658-2006 ofthickness 60 mm thickness m-35 grade,withgrey cement and pigment complete all as specified and directed 7 material and labour for12mm thick premium quality tiles hi-traffic range of endura full body vitrified with anti skid finish, square in shape, area of each tile exceeding 0.08 sqm but not exceeding 0.10 sqm laid in floor/paving set and jointed over and including screed bed of 40mm thick in cement mortar 1:3 complete all as specified and directed 8 demolition of brick or stone masonry work, built in cement mortar incl all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work complete all as specified and directed. 9 material and labour for brick work with sub class b old size bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) and including taking out roots ,of bushes/vegetation growth upto 120 cm complete all as specified and directed. 10 all as per serial item no 9.00 above except bricks -ditto- 11 material and labour for pcc (1:2:4) type b-0 using 12.5mm graded stone aggregate as in copings as in brick wall duly rounded or chamfered on edges complete all as specified and directed 12 taking down existing plaster of any description on brick wall/ concrete surfacein facia, chhajjas, balconies, roof/ceiling at any floor (upto g+3)including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed 13 material and labour for rendering 15mm thick in cm (1:4) on fair faces of brick/concrete surfaces of walls mixed with water proofing compound and finished fair and even without using extra cementcomplete allas specified and directed. (note : wpc shallbe measured and paid for separately and the rates quoted in this item are inclusive of providing necessary scaffolding and other requisite arrangements , cost of t&p ,all safety devices etc complete.) 14 supply only integral waterproofing compound complete allas specified and directed. 15 material and labour for preparation of newly plastered surfaces and applying two coats of weather proof exterior emulsion paint over and including one coat of primer on walls complete all as specified and directed 16 dismantling of wrought iron mild steel work of any description or from any position complete all as specified and directed. 17 fixing only serviceable framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred ,iron doors, ms plain sheet, xpm, ladders, framed balusters, walk way, railings, framed work of water tanks and similar work confirming to fe 290 gde-e-165 complete all as specified and directed. 18 supply and fixing for framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred ,iron doors, ms plain sheet, xpm, ladders, framed balusters, walk way, railings, framed work of water tanks and similar work confirming to fe 290 gde-e-165 complete all as specified and directed. 19 material and labour for preparation of new steel surfaces exceeding 10cm width or girth when unconnected with other painting and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. 20 material and labour for welding in repair to windows, door hinges, grills etc exc 2.50 cm of thickness not exc 6mm complete all as specified and directed. 21 material and labour for preparation of old steel surfaces exceeding 10cm width or girth when unconnected with other painting and applying two coats of synthetic enamel paint complete all as specified and directed. 22 dismantling of gi barbed wire fencings fixed in rcc/steel fencing posts complete all as specified and directed. 23 supply and fixing for gi 2 stranded barbed wire 2.24mm dia wire with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire. staples or steel pins etc as directed (each line wire to be measured) complete all as specified and directed. 24 all as per serial item no 23.00 above but except barbed wire-ditto- 25 all as per serial item no 23.00 above but restraining, resecuring including making good staples only -ditto- 26 supply and fixing in repair mail/ letter box with 8 mm thick one side prelaminated high density high moisture resistances (hdhmr) board any colour wood grains, with white base paint finish uv hdhmr corner side rounding with edge medium density, flat pressed, single layer type or three layer type with bwr type adhesive, fixed with piano hinges hasp staple, 50 mm handle d type & necessary arrangement for fixing to wall complete all as specified anddirected. 27 supply and fixing in repair steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, with and including safety lever locks mild steel with 4 levers, thickness of lath 1.25mm complete: push pull or manual type, thickness of lath 1.25 mm complete all as specified and directed 28 material and labour for machine cut kota stone slab flooring, 15-18mm thick in (single piece), riser of step, skirting & dado in repair over cement screed 1:6 cm base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed 29 hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frame complete all as specified and directed 30 supply and fixing for 4 mm thick sheet glass ordinary quality and glazing with silicon and oil putty in square n exc 0.50 sqm in each pan complete all as specified and directed 31 material and labour in replacement of18mm thick both side prelaminated high density high moisture resistances (hdhmr) board any colour wood grains, with white base paint finish uv hdhmr corner side rounding with edge bending tape, pvc boxes, drawer any shape and sizes will be made up by machines matching with final finish (uv) and shutters of cupboard/almirah complete all as specified and directed. (note :- design and colour approved by ge) 32 supply and fixing in repair for pre laminated particle board 18mm interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fitted with all around timber beading of 18mm x 18mm of second class soft wood clean sawn and wrought as in shelves of cupboards/ almirah or similar works complete all as specified and directed. 33 supply and fixing in repair 2nd class hard wood plain fillets sectional area exc. 6sqcm n.exc. 13sqm clean sawn wrought, secured with nails or brads complete all as specified and directed 34 supply and fixing in repair 2nd class hard wood plain fillets sectional area exc. 13sqcm n.exc. 25sqm clean sawn wrought, secured with nails or brads complete all as specified and directed 35 supply and fixing in repair continuous piano hinges, mild steel, bright finish or electro-galvanised width of trap when open 40mm thick complete all as specified and directed 36 supply and fixing for 100mm size of aluminium hasp & staple including bolt to hinge plate & fixed with screws, complete all as specified and directed. 37 supply and fixing for aluminium anodized handle of extruded section 150mm longcomplete all as specified and directed. 38 hacking out old glass pane of any description of size nexc 1 sqm each in windows of 2nd floor, provision of providing two nos of t section of size 30x30x4 mm drilling and welded complete as per site requirement with and incl requisite painting with primer and two coats of synthetic enamel paint to match with existing colour, and fixing 3 nos of glass pane 4mm thickfixed with silicon, pins and putty with and incl all safety precautions and scaffolding etc. complete all as specified and directed 39 hacking out old glass pane of any description of size nexc 1 sqm each in windows of 1st floor, provision of providing two nos of t section of size 30x30x4 mm drilling and welded complete as per site requirement with and incl requisite painting with primer and two coats of synthetic enamel paint to match with existing colour, and fixing 3 nos of glass pane 4mm thickfixed with silicon, pins and putty with and incl all safety precautions and scaffolding etc. complete all as specified and directed 40 hacking out old glass pane of any description of size nexc 1 sqm each in windows of ground floor, provision of providing two nos of t section of size 30x30x4 mm drilling and welded complete as per site requirement with and incl requisite painting with primer and two coats of synthetic enamel paint to match with existing colour, and fixing 3 nos of glass pane 4mm thickfixed with silicon, pins and putty with and incl all safety precautions and scaffolding etc. complete all as specified and directed 41 material and labour for preparing old painted surfaces of walls by washing, rubbing down and stopping of painted surfaces and applying two coats of weather proof acrylic emulsion paints, exterior grade (100% acrylic)on surfaces of walls in multistorey buildings three to five floors with and including requisite scaffolding and all necessary safety precautions and jhula arrangementcomplete all as specified and directed 42 supply and fixing forpvc non woven and vinyl printed design wall paper of thickness 200-280 gsm. the rate to include surface preparation and fixing using adhesive as per manufacturer guidelines as approved and complete all as specified and directed