tender for 15th fc 2024-25-i untied - additional works to marriage hall in kallidaikurichi town panchayat..; 1 plastering with cm 1:3 (one part of cement & four parts of sand) mix for 12mm thick including cost and conveyance of all materialsto work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications and as directed by departmental engineers – tnbp no:56&57 2 plastering with cm 1:4 (one part of cement & four parts of sand) mix for 12mm thick including cost and conveyance of all materialsto work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications and as directed by departmental engineers – tnbp no:56&57 3 fabrication and supply of fixing of mild steel door of any required size including all charges etc., complete complying with standard specification and as directed by the departmental officers. 4 painting with exterior emulsion painttwo coats with best approved brand and colour.the brand and colour should be got approved from the exe.engineer before use on works. 5 paintingtwo coats over iron workswith best approved brand and colour.the brand and colour should be got approved from the exe.engineer before use on works. 6 plaincement concrete 1:4;8 mix (one cement, four fine aggregate and eight coarse aggregate) using 20mm iss hbg metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental engineers(tnbp no.28). 7 plaincement concrete 1:11/2:3mix (one cement, four fine aggregate and eight coarse aggregate) using 20mm iss hbg metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental engineers(tnbp no.28). 8 supplying and laying rubberised interlocking paver blockm40 grade providing and laying of63mmthick high strength type conforming is 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40n/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approvednon skitting surface in the top and the rate including levelling the base preparation ofpavers as sub base, sand cushion 100mm thick layingout of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. 9 wiring with 2x2.50sqmm for- light point 10 wiring with 2x2.50sqmm for-plug point 11 wiring with 2x2.50sqmm for- fanpoint 12 wiring with 2x2.50sqmm for-tube light fitting 13 wiring with 2x2.50sqmm for-ceiling fan