tender for renewal with general repair work of paltupur link road - construction of embankment with approved material obtained from right of way with all lift and lead , transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300.2 as per technical specification clause 303.1.(including cess and excluding g.s.t.) 2 providing, laying, spreading and compacting stone aggregates of53 mm to 22.4 mm @ 0.91 cum per 10 sqm for compacted thickness of 75 mm and stone dust (dust shankargarh) @ 0.18 cum per 10 sqm (wbm g -3) shankargarh stone to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kn in stages to proper grade and camber, a mord specific - ations 405.3(including cess and excluding g.s.t.) 3 providing and applying tack coat with bitumen vg-10 gradeusing bitumen pressure distributor @ 0.35 kg per sqm on the prepared granular surfaces & cleaned with broom as per technical specification clause 503.(including cess and excluding g.s.t.) 4 providing, laying and rolling of open-graded premix surfacing of 20mm thickenss composed of crushed stone grit, 13.2 mm & 11.20 mm @ 0.27 cum per 10 sqm (13.2mm @ 0.18cum and 11.2 @ 0.09 cum) aggregate using viscosity grade bitumen vg-10 to required line, grade and level to serve as wearinig course on a perviously prepared base including mixig in a suitable plant laying and rolling with a smooth wheeled roller 8-10 tonne capaciry finished to required level and grade. (including cess and excluding g.s.t.) 5 providing and laying seal coat with crushed stone chipping of 6.7 mm size 100% passing 11.2 mm sieve and retained on 2.36 mm sieve applied @ 0.09 cum per 10 sqm, forsealing the voids in bituminous surface (20mm primix carpet) laid to the specified levels, grade and cross fail using type-c seal coat.(including cess and excluding g.s.t.)