supply of materials for works under mgnregs on rate contract basis for construction of urulumotta anganwadi& various roads , material supply , stone aggregate(single size):40 mm nominal size , stone aggregate(single size):20 mm nominal size , stone aggregate(single size):10 mm nominal size , coarse sand-zone iii , portland cement , mild steel round bar above 12 mm dia , wall form panel 1250x500 mm , corner angle 45x45x5 mm 1.50 m long , 100 mm channel shoulder 2.5 m long , double clip( bridge clip) , single clip , m.s tube 40 mm dia , sundries , hire charges of concrete mixer 0.25 to 0.40 cum with hopper , vibrator(needle type 40 mm) , twisted steel/deformed bars , structural steel such as tees, angles, channels and r.s joists , red oxide zinc chromate primer , adjustable telescopic prop 3 m(2.02-3.75m) , beam clamp 300-380 mm(450-1070 mm) , adjustable span eso+ si(2.35-3.40) , second class kail wood in planks , second class kail wood in scantling , hollock ballies 125 mm diameter , stone for masonry work , through and bond stone size 24x24x39 cm , royalty for good earth , solid blocks of size 40x20x20 cm , solid blocks of size 40x20x15 cm , hollow blocks of size 40x20x10 cm , 35 mm thick factory made solid panel pvc door shutter of single piece extruded profile non decorative finished(matt finished) , powder coated m.s butt hinges 100 mmx58 mmx1.9 mm , bright finished or black enameled mild steel screws 40 mm , bright finished or black enameled mild steel screws 20 mm , flats upto 10 mm in thickness , rawl plug 50 mm (designation 10 nos) , 200 mm aluminium aldrop , iron hooks & eyes 100 mm , second class teak wood in scantling , second class teak wood in planks , bright finished or black enameled mild steel butt hinges 100x58x1.90 mm , bright finished or black enameled mild steel butthings 50x37x1.5 mm , float glass sheet of nominal thickness 4 mm(weight not less than 10 kg/sqm) , stainless steel kitchen sink-without drain board 470x420 mm bowl depth 178 mm , c.i bracket for wash basin and sinks , vitreous china flat back wash basin 550x400 mm , 15 mm c p brass tap , c. p brass waste 32 mm , brass bib-cock-15 mm dia , vitreous china orrisa type w.c pan size 580 mm , fine sand(zone iv) , ceramic glazed tiles 1st quality 300x300 mm in all shades and designs of white,ivory, grey, fume brown etc , ceramic glazed tiles 1st quality minimum thickness 5 mm in all colours shades and designs except burgundy,bottle green black , solid blocks of size 30x20x15 cm , water thinnable cement primer for interior wall surface, having voc content less than 50 gms/litre , plastic emulsion paint , black japan , pink primer(for wood) , synthetic enamel paint in black or chocolate shade , pvc pipe 25 mm outer dia. 10kgf cm2 , pvc pipe 32 mm outer dia. 10kgf cm2 , pvc pipe 110 mm outer dai 6 kgf/cm2 , pvc bend 63 mm dia , pvc vent cowl 63 mm dia , pvc pipe 63 mm outer dia 4 kgf/cm2 , safeda ballies 125 mm diameter , polythylene water storage tank with cover and suitable locking arrangement , precast chquered cement tiles 22 mm thick dark shade using ordinary cement