tender for aanivayal anganwadi nirmmanam no 59 ward 15 , anganwadi building construction , stone aggregate(single size): 40 mm nominal size , stone aggregate(single size):20 mm nominal size , coarse sand (zone iii) , portland cement , hire charges of concrete mixer 0.25 to 0.40 cum with hopper , vibrator (needle type 40 mm) , sundries , stone for masonry work , solid blocks of size 30x20x20cm , solid blocks of size 30x20x15cm , stone aggregate(single size): 10 mm nominal size , wall form panel 1250x500 mm , corner angle 45x45x5 mm 1.50 m long , 100 mm channel shoulder 2.5 m long , double clip (bridge clip) , single clip , m.s. tube 40 mm dia , structural steel such as tees, angles, channels and r.s. joists , red oxide zinc chromate primer , adjustable telescopic prop 3 m (2.02-3.75m) , beam clamp 300-380 mm (450-1070 mm) , adjustable span eso+si (2.35-3.40) , second class kail wood in planks , second class kail wood in scantling , wall form panel 1250x450xmm , corner angle 45x45x5 mm 2.50 long , column clamp 450x1070 mm , prop 2 m (2-3.5m) , twisted steel/deformed bars , second class teak wood in scantling , anjili wood scantls , bright finished or black enameled mild steel butt hinges 100x58x1.90 mm , bright finished or black enameled mild steel butt hinges 50x37x1.50 mm , bright finished or black enameled mild steel screws 40 mm , bright finished or black enameled mild steel screws 20 mm , anjili wood planks , float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) , flats up to 10 mm in thickness , mild steel round bar above 12 mm dia please enable macros to view boq information