the work of dyeing, painting and repairing and installing tiles in the health garage in mohannagar zone. - providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1) cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete 2 first class brick work in (1:4) cement & four coarse sand |2.20 f.m. morter in foundation and plinth and t&p etc all completed as per the direction of engineer - in -charge. (as per pwd sor 2022 page no 20 si no 6.0s item no 305 (a) 3 12 mm thick plaster with cement and coarse sand of1.25 |fineness modules in (1:4) over brick work minimunm thickness not to be less than 1 cm including supply of all material, labour, tools & plant etc required for proper completion of the work. (as per pwd sor 2022 page no 36 si no 13.11 new item) 4 s/l c:c (1:2:4) with 20 mm stone grit, coarse sand & cement etc all complete as the direction of engineer in charge. 5 dismantling existing plaster including disposal etc 6 scraping of old paintetc 7 wall painting with letter writting including labour, tools, plant and base prepartion with primer, wall putty and paint with enamel paint etc required for proper complitionetc all complete as per specification or direction by engineer in charge. 8 providing wall putty on new surface with approved quality material of berger/ j.k/birla or similar make 2 coats 9 finishing wall with one coat of water proof cement paint of approved quality on previously old treated surface with this paint to give an even shade including supply of all materials, labour, tools & plant etc. required for proper completion of the work. 10 s/l of stone ballast 22.4 to 53 mm size with stacking formeasurment etc all complete as per the direction of engineer in-charge . as per pwd sor 2020 rmr 11 supply & laying 80 mm thick precase cement concrete ishape interlocking paver block (grey color) with top layer of minimum 8 mm thickness having plan dimension |200x(160+120mm) of o.p cement smoothing gloss |finish,skid resistant manufacturered from rubber moulds m 30 grade