tender for civil work - park near h.no. r-480 mangolpuri-improvement and development of park boundary wall by pdg marble wash and ms grills near h.no. r-480 in r-block mangolpuri ward no.49 m-i/rz., dsr dar civil-2018 and approved items; 1 imp park 2 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar 3 6.4.2:brick work with common burnt clay f.p.s. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in:cement mortar 1:6 (1 cement : 6 coarse sand) 4 13.4.2:12 mm cement plaster of mix:1:6 ( 1 cement : 6 coarse sand) 5 5.9.6:centering and shuttering including strutting, etc. and removal of form for:columns, pillars, piers, abutments, posts and struts 6 10.25.2:steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works 7 4.1.3:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:2:4 (1 cement : 2 coarse sand (zone-iii) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 8 110.9.1:24mm thick washed marble chips plaster on exterior walls of height up to 10 m above ground level in two layers under layer 12 mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 kg of cement/sqm, top layer 12mm thick cement marble chips plaster 4:7 (4 cement : 7marble chips 4mm size of required colour) in panel with grooves all around as per approved pattern including scrubbing and washing the top layer with brushes and water to expose the marble chips complete as per specifications and directions of engineer in charge (payment for providing groove shall be made for separatelyusing ordinary cement in top layer 9 13.73.1:forming groove of uniform size in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and directions of the engineer-in-charge:15 mm wide and 15 mm deep groove 10 13.61.1:painting with synthetic enamel paint of approved brand and manufacture to give an even shade:two or more coats on new work 11 13.99.1:painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :one or more coats on old work 12 16.53:providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m) , having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron y shaped placed 2.4 m or 3.00 apart and with 9 horizontal r.b.t. reinforced barbed wire, stud tied with g.i. staples and g.i. clips to retain horizontal, including necessary bolts or g.i. barbed wire tied to angel iron, all complete as per direction of engineer- in-charge, with reinforced barbed tape (r.b.t.) / spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of m.s. angle, c.c. blocks shall be paid separately) 13 1.1.1_12:disposal of materials by mechanical transportincluding loading ,unloading and stacking lime ,moorum, buildingrubbish for lead 12 km 14 110.10:providing and fiving name board made of ms sheet 90x60cm, 1mm thick with frame of ms angle 50x50x6mm, two diagonal braces at the back of the sheet of ms flat 40x6mm, total height of the board above ground level 2.40m, length of legs below ground 0.30m embedded in cc block 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20mm nominal size) 30x30x45cm including excavation and removal of surplus earth with in 50m lead, applying priming coat of approved steel primer, painting with synthetic enamel paint of approved quality and lettering with enamel paint of approved colour (one side) as per drawing/direction of engineer-in-charge