procurement of pneumatic fittings and tubing for various candi instrument at 2x600mw, sstpp, mppgcl, dongalia , ss straight hex adapter/connector , 1/4npt(m) x 1/8npt(m) , 1/4npt(m) x 1/4npt(m) , 1/4npt(m) x 1/2npt(m) , 3/4bsp(m) x 1/2npt(m) , 1/4bsp(m) x 1/2npt(m) , 3/8bsp(m) x 1/2npt(m) , 1/4bsp(m) x 1/2npt(m) , 3/8bsp(m) x 1/2npt(m) , 1/2npt(m) x 1/2npt(m) , 1/2npt(m) x 1npt(m) , 1/8npt(m) x 1/2npt(m) , 1/4bsp(m) x 1/2bsp(m) , 3/4bsp(m) x 1/2bsp(m) , 1/4npt(m) x 1/2bsp(m) , 3/8npt(m) x 1/2bsp(m) , 3/4bsp(m) x 1/2bsp(m) , 3/8bsp(f) x 1/4npt(f) , 3/8bsp(f) x 1/2npt(f) , 1/2bsp(f) x 1/4npt(f) , 1/2npt(f) x 1/4npt(f) , 1bsp(m) x 1npt(m) , 1/2npt(m)x m19(m) , 1/2npt(m)x m14(m) , 1/4npt(m)x m10(m) , 3/8npt(m)x m10(m) , m10(m)x m10(m) , m12(m)x m12(m) , 3/8npt(m)x 1npt(m) , 1/4npt(m)x1npt(m) , ss elbow , 1/4npt(m) x 1/8npt(m) , 1/4npt(m) x 1/4npt(m) , 1/4npt(m) x m10(m) , 1/2npt(m) x m18(m) , 1/4npt(m) x m19(m) , ss cap , 1/4npt , 1/2npt , ss double (front & back) ferrule , 6 mm , 8 mm , 12 mm , brass ferrule (single) , 6 mm , ss hex dummy plug , 1/8npt , 1/4npt , 3/4npt , 3/8npt , 1/2npt , 1npt , 3/2npt , 1/4bsp , 3/4bsp , 3/4bsp , 1/2bsp , 1bsp , ss socket , 1/2npt , pvc tube, od- 6 mm, id- 4 mm , ss tube od-12 mm, id-10mm , fittings- (double ferrule with nut) , tube-to-tube connection (6 mm tube) , straight union with two nut & ferrule ¼” od (npt) , reducer union with two nut & ferrule ¼”od x 3/8”od (npt) , tee union with three nut & ferrule ¼” od (npt) , elbow union with two nut & ferrule ¼” od (npt) , cross union with four nut & ferrule ¼” od (npt) , tube to pipe connection , male connector ¼”od x ¼” nptm , female connector ¼”odx1/4” nptf , pipe to hose fitting/hose adapter 3000psi) ¼” nptm x ¼” hose , gauge adaptor with two outlet (3000psi) inlet- ½”npt(m), outlet- 2x1/2” npt (f) , reducer bushing , ½” npt (m) x 3/8” npt(f) , ½” npt (m) x ¼” npt (f) , needle valve , 1/4” npt (m) both side , 1/4” npt (f) both side , 1/2” npt (m) both side , 1/2” npt (f) both side , multipoint type with vent plug- ½” npt (f), 1000 psi , needle valve with compression fitting, double ferrule- , ¼” od, 1000psi , ¼”npt(f) x ¼”npt(f)- single bonnet , needle valve with drain plug , ½” npt(m) x ½” npt(f), 1000psi , ¼”npt(m) x ½”npt(f), 1000 psi , ¼”npt(f) x ¼”npt(f), 1000 psi , 1/2”npt(f) x1/2”npt(f), 1000 psi , 2 wayball valve , ½” npt(f) x ½”npt(f), 1000 psi , ¼” npt (f) x ¼”npt(f), 1000 psi , 3 way ball valve , ¼” npt(f), 1000 psi , ½” npt (f), 1000 psi , manifold , 2 way, r-type, ½” npt, 3000psi , 3 way, r-type, ½” npt, 3000psi , 5 way, r-type, ½” npt, 3000psi , air header (manifold)10 way- (5x5)inlet: 1” nptf ball valve outlet: ½” nptf ball valve with ½”nptm plugdrain: ½” nptf ball valve with ½” nptm plug , pressure gauge cock3 way- ½” npt(m) x ½” npt(f) , snubber with pressure regulator , ½” bsp(m) x ½” bsp(f) , ½” npt(m) x ½” npt(f) , ½”npt(m) x 3/2” bsp(f) , impulse line , od-6mm, id-2mm, 3000 psi , od-8 mm, id-4 mm, 3000 psi , od-12 mm, id-8 mm, 4000 psi , compression fitting for rtd , rtd probe dia-5 mm one side- ½” bsp m, thread length-13.5 mm other side- ¼” bsp m, thread length-12 mm with nut & ferrule for 5 mm probe , rtd probe dia-8 mm one side- ½” bsp m, thread length-13.5 mm other side- ¼” bsp m, thread length-12 mm with nut & ferrule for 8 mm probe , flange (150 ff) 1/2 “ npt (f) , ss nipple , total length- 95 mm½” npt m thread (length-15 mm) both side , total length- 150 mm½” npt m thread (length-15 mm) both side , qs push in cross (plus/four way)connector 6mm , qs push in t connector 6mm , block and bleed valve , ¾ bspf * ½ nptm connector , ¾ nptf * ½ nptm connector