tender for renewal work at saini tusyana surajpur road in district gautambudhnagar - ( bituminous work)earth work in embankment (for patri) with ordinary soil excavation to be in the form of regular pits not exceeding 0.50 m. in depth and earth work in patries should be including ramming and dressing the surface to required levels and slopes as directed by the engineer incharge.including cost of, all material, labour, t&p, labour cess, all taxes complete. but excluding gst. as per s.i. no. 253 a 2 providing, laying, spreading and compacting stone aggregates of 22.4-53 mm sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3.including cost of, all material, labour, t&p,royality, labour cess, all taxes complete. but excluding gst. as per technical specification clause 405. 3 providing and applying tack coat with bitumen vg-10 using bitumen pressure distributor at the rate of 0.30kg per sqm on the prepared granular/bituminous surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503.including cost of, all material, bitumen, labour, t&p, all taxes and labour cess complete. but excluding gst. 4 providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen vg-10 to required line, grade and level to serve as wearing course on a previously prepared base, including mixing, laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades as per mord specifiction clause 508. including cost of, all material, bitumen, labour, t&p,royality , all taxes and labour cess complete. but excluding gst. 5 providing and laying seal coat by manual means with vg-10 grade bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type c as per technical specification clause 510. including cost of, all material, bitumen,labour, t&p,royality, all taxes and labour cess complete. but excluding gst.