tender for maintenance work or vvip guest house karhal - dismantling existing plaster including disposal of refuse as directed by engineer-in-charge within a distance of 60 meters.. including cost of all taxes but excluding gst. 2 scrapping old white or colour wash including disposal of refuse as directed by engineer-in-charge within a distance of 60 meters (200 feet) including cost of all taxes but excluding gst. 3 12mm cement plaster with cement mortar in proportion of 1:3 cement & coarse sand ofsingle coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth. including cost of all taxes but excluding gst. 4 15mm cement plaster with cement mortar in proportion of 1:3 cement & coarse sand ofsingle coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm ingirth and finished even and smooth. including cost of all taxes but excluding gst. 5 painting 1st coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces upto 10cm width or girth or small articles not exceeding 0.10 sq.m. in area with superior synthetic enamel such as luxol 3, hi gloss apcolite, superlac, dulux specified brushing to give and even shade and including the cleaning the surface of all dirt, dust and other foreign matter sand papering and scrapping including cost of all materials, labour, tools and plants etc. required for proper completion of work. but for every coat on previous painted surface including cost of all taxes but excluding gst. 6 sprit polish including sand paperings cleaning the surface properly and then applying the sprit polish colour with shining finishing supply of all labour material and t&p required for proper completion of work. for old surface. including cost of all taxes but excluding gst. 7 finishing walls with pop approved brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material, labour, t&p etc. required for proper completion of work. including cost of all taxes but excluding gst. 8 finishing walls with putty approved brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material, labour, t&p etc. required for proper completion of work. including cost of all taxes but excluding gst. 9 finishing walls with deluxe mulitsurfacepaint @ 1.25 ltr. per 10 sqm ofapproved brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material, labour, t&p etc. required for proper completion of work.for two coat.over one coat of primer applied 0.75ltr per 10 sqm. including cost of all taxes but excluding gst. 10 finishing walls with exterior emulsionpaint (apex) ofapproved brand and manufacture and of required shade on undacorated wall surface to give even shade over @ 1.25 ltr/10sqm including one coat ofprimer applid @ 0.75ltr/10sqm coat curing and cost of all material, labour, t&p etc. required for proper completion of work.for two coat. including cost of all taxes but excluding gst. 11 conditions:- schedule - “c”1- bitumen v.g.-10 shall be issued from the centralstore cd-3, pwd, mainpuriat stock issue rate at the time of issuing the material from the store and the bitumen will be recovered from the contractors bill at the stock issue rate or market rate whichever is maximum.2-emulsion if available shall be issued from the central store cd-3, pwd, mainpuriat stock issue rate at the time of issuing the material from the store.3- there shall be no claim of contractor, if the material is not issued by the department due to non-availability in store or any other reason.4- the unconsumed material issued in excess of bonafide consumption norms, shall have to be returned back to the store as mentioned above, failing which a recovery at the penaltative rate, i.e., double the issue rate shall be made from the contractor’s bill.5- contractor have to return empty bitumen drums / emulsion drums immediately, failing which a recovery at the punitive rate i.e., rs. 3000 per drum shall be recovered from the contractor’s bill.6- the departmental road roller if spare, shall be made available to the contractor at site @ rs. 2450 per day including pol charges, wages of driver and cleaner. if roller is kept idle due to non-availability of material or labour, recovery @ rs. 2450 per day shall be made from contractor’s bill for idle period.7- all material should be purchased from approved quarry