tender for lavad mithepur dedua road to lavad jalapur sector road - providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405. including supply of all material labour, t&p etc also including labour cess, royalty and all other applicable taxes(but excluding gst) 2 providing, laying, spreading of stablized graded stone aggregate (wmm) after mixing with with water at omc in mechanical mix plant carriage of mixed material by tipper to site, laying with 1% opc cement and 3.5% emulsion in unform single layer on sub-base/ subgrade and compacting with the road roller to achive the desire density. including supply of all material labour, t&p etc also including labour cess, royalty and all other applicable taxes(but excluding gst) 3 providing and applying tack coat with bitumen vg-10 grade usingpressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. including supply of all material labour, t&p etc also including labour cess, royalty and all other applicable taxes(but excluding gst) required for proper completion of work as per direction of engineer-in-charge. technical specificaton clasue(si.no. 503). including supply of all material labour, t&p etc also including labour cess, royalty and all other applicable taxes(but excluding gst) 4 providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using vg-10 bitumen required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling witha three wheele80-100kn static roller capacity,finished to required level and gradesto be followed by type-c seal coat. including supply of all materiallabour, t&p etc also includinglabour cess, royalty and all other applicable taxes(but excluding gst) required for proper completion of work as per direction of engineer-in-charge.as per technical specification clause. 508.including supply of all material labour, t&p etc also including labour cess, royalty and all other applicable taxes(but excluding gst) required for proper completion of work as per direction of engineer-in-charge. technical specificaton clasue(si.no. 503). 5 providing and laying type-c seal coat with vg-10 bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type c. including supply of all material labour, t&p etc also including labour cess, royalty and all other applicable taxes (but excluding gst) required for proper completion of work as per direction of engineer-in-charge.as per technical specification clause 510. including supply of all material labour, t&p etc also including labour cess, royalty and all other applicable taxes(but excluding gst) 6 earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 m. in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50 m. lift and 1 km. lead. the earth from cutting to be used in making embankment or to be deposited as spoil banks with-in 30 m. distance as directed by the engineer incharge.