tender for village panchayat banjaria subi freedom fighter jai hind singh alias lalai singh memorial gate construction work - excavation of foundation in ordinary soil (ioam clay or sand) including lift upto 1.50 meter and lead up to 30meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer in charge upto a distance of 30 meters from the foundation trenches. as per s.i. no. 251 2 concrete with 4cm. gauge approved stone ballast, coarse sand and cement in proportion of 8:4:1 including supply of all materials labour and tools and plants etc. required for proper completion for the work. sor-281 3 r.c.c. work with cement approved coarse sand and 2cm gauge approved stone grit in the proportion of 1:1.5:3 in rcc raft foundation and footing with 4 cm. (1½) gauge approved stone ballast, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24b.w.g.g.i binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and t&p etc. required for proper completion of the work. sor 287a 4 r.c.c. work with cement approved coarse sand and 2cm gauge approved stone grit in the proportion of 1:1.5:3 in rcc t-beam and slab roofs and rcc columns, excluding supply of reinforcement and its binding but including its fixing and binding the same with 24b.w.g.g.i binding wire and including necessary centering and shuttering etc. and also including supply of all materials, labour and t&p etc. required for proper completion of the work. t-beam, slab & column sor-288a 5 mild steel or reinfored for rcc work for proper completion of the work andincluding supply of steel its wastage. sor-504 6 steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 7 painting new iron or wood work with one coat of reaadymix paint + two extra coat sor-641+642 8 providing and erecting overhead signs with corrosion resistant 2mm thick alluminium alloy sheet reflectorised with high intensity retro reflective sheeting of encapsulated lense type with vertical and leteral clearance given in clause 802.2 and 802.3 and intalled as per clause 802. over a disined support system of alluminium alloy or galvanised steel tresles and trussesof section and type as structural desin requirement and approved plans 9 s/f of signboard