tender for general maintenance work of newly constructed circuit house banda, 1 dismantlingbrick work or stone work in lime or cement mortar and including stacking of materials as directed by the engineer-in-charge within a distance of 60metres. as per si no 692 2 dismantling existing plaster, including disposal of refuse as directed by the engineer-in-charge within a distance of 60metres. sor 706 3 12mm thick plaster on brick work minimum thickness not less than 10mm with mortar in 1:4. of 1.25 fineness modulus.as in si 585 4 12mm thick plaster on brick work minimum thickness not less than 10mm with mortar in 1:6. of 1.25 fineness modulus.as in si 580 5 distempering with 1st quality acrylic distemper (ready mixed) having voc content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour :new work (two or more coats) over and including water thinnable priming coat with cement primer having voc content less than 50 gram/litre dsr13.41.1 6 finishing walls with acrylic smooth exterior paint of required shade :new work (two or more coat applied @ 1.67 itr/10 sqm over and including priming coat of exterior primer applied litre/10 sqm) 0.90 dsr 13.46.1 7 providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete sor 13.8 8 supply and fixing 6mm (1/4) china white glazed tiles in flooring or in skirting or dado laid with ratio 1:4 cement and approved coarse sand finished with white cement slurry, jointing and polishing complete, including supply of all material, labour and tool and plants etc. required for proper cpmpletion of the work. sor 628 9 providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :rectangular shape 1500x450 mm dsr 17.32.4 10 providing & fixing stone slab table rubbed, edges rounded and polished of size 75 x 50cm deep and 1.8 cm thick fixed in urinal patitions by cutting chase of appropriate width with chase cutter and embedding the stone in chase with epoxy grout or with cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregste 6mm nominal size) as per engineer-in-charge and finished smooth granite stone of approved shade dsr 8.10.2 11 providing and fixing isi marked flush door shutters conforming to is : 2202 (part 1) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.35 mm thick including isi marked stainless steel butt hinges with necessary screws dsr 9.20.1 12 providing and fixing isi marked oxidised m.s. tower bolt black finish, (barrel type) with necessary screws etc. complete : 250x10 mm dsr 9.63.1 13 providing and fixing isi marked oxidised m.s. door latches conforming to is:5930 with screws etc. complete :300x20x6 mm dsr 9.65.1