tender for replacement of damaged windows and doors in the house due to change of residence in house no. 7 type-6 located in gomti nagar phase-2 minister residence, repair of damaged kota stone and external painting and whitewashing work and other necessary repair work, 1 removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 13.88 2 p/a white cement based putty of average thickness 1 mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 13.80 3 finishing wall with premium acrylic smooth exterior paint with silicone additives of required shade new work. (two or more coats applied @1.43 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg /10 sqm) (apex ultima, weather coat all guard asian, berger. (ch-15/dsr n0-13.47.1 ) 4 structual steel work riveted bolted or welded in built up section, trusses, builds up gates,framed work lncluding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. sl.n0-10.2, 5 providing corrugated g.s. sheet roofing including vertical / curved surface fixed with polymer coated j or l hooks, bolts and nuts 8 mm diameter with bitumen and g.i. limpet washers or with g.i. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m² dar n0-12.1.1, 6 kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick dar 11.26.1 7 providing and fixing isi marked 35 mm thick flush door shutters conforming to is : 2202 (part i)non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply veneening with vertical graints or cross brand and face veneers on both faces of shutters. dar n0-9.21.1