tender for servicing and replacement of worn-out component of 2 nos. starter motor control panel at gokhale road drainage pumping station under bdps ( s&d ) .- 1 power contractor (make l&t) mnx-140 2 power contractor (make l&t) mnx-110 3 copper conductor single core 6 sq mm 4 overload relay (180 to 300 amp) (make l&t/ge/ schnider/ siemens) 5 timer (0 to 30 sec) (make- siemens/l&t/schnider) 6 push bottom switch (start/stop/restart) make- siemens/l&t/schnider) 7 control fuse -100 amp, 415volt (make-ge/kaycee) 8 single phase preventer with ct(makel&t/schnider/siemens/minilec) 9 amp selector switch (make: l&t/abb/ schnider) 10 0-500v. ac analog voltmeter of 144 mm (make:ae/kappa/imp) 11 indicating lamp led type (make- vaishno/essbee) 12 voltmeter selector switch (make: l&t/abb/ schnider) 13 0-100 amp. 144 mm analog ammeter, ct-100/5. (make:ae/kappa/imp) 14 supply of 1.1 kv grede 3. ½ core pvc unsheathed copper conductor 37/3.00 mm size 440 volt. 15 internal power control circuit wiring including necessary connection. 16 supply and fixing compression gland type complete wiyh the brass gland rubber ring for dust moisture proof entry of pvc armature cables for 3 core 50 sq.mm 17 fixing the end of the following cable for 3 ½ core 50 sq.mm by cramping method including supplying and fixing dowels solder less socket tapes and joining materials. 18 complete dismantling of bus bar & cleaning by petrol, etc after cleaning re-insulation the bus bar by class-f grade insulation & re-fixing as per existing way of lt panel board unit-a&b. 19 dismantling the existing motor starter including disconnecting of the feeder line. 20 painting of any steel/ iron surface with no. of coats of paints as given below with ready mixed paint/primer of approved make and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint. aluminium paint & synthetic enameled paint (1st &2nd coat), red lead/zinc cromate.