tender for installation of solar information to bidders:annexure -1street light at belenda dorgatola - applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the eic. (in ground floor) two coats i) water based interior grade acrylic primer , protective and decorative acrylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of engineer-in-charge to be applied over acrylic primer as required. the rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.b) premium 100% acrylic emulsion , painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :on steel or other metal surface :with super gloss (hi-gloss) -two coats (with any shade except white) , quality & shade inposition, the style & rail ofthe p.v.c. door shutter will be madeofrigid p.v.c. multicavity hollow chamber of suitable size and section with 2.5 mm wall thickness,thesection willhave 2 no. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2nos of m.s. tybular gaslvanizedbracketsoflength 200 mm x 80 mm and other 100 mm x 100 mm both 18 gauge in each corner of the shutter frame for placing hinges, polymer basedmulticavity hollow section of 25 mm thickness will be fitted in the middle withalluminiumcleat and steel screws as lock rail, the section frame will thenbe fitted in by polymer based panels of suitablesize and 2 no of 6 mm diabrightrod will be inserted horizontally with both side checkand nut system and strecches where fixing of hinges/hasp balt/tower bolt/door ring are required to be strong enough to withstand wear and tear. the rate in inclusive of cost of 100 mm . anodised alluminium hingesand cost of allmaterials and labour, hire chargesof tools and plants and appliences. carriage of all materials taxes and all ther incidental charges complete. (width of shutter ranging from 0.60 mts to 1.20 mtsand height ranging from 1.83 mts to 2.10 mts). (a) 30 mm thick shutter with 25 mm thick panel (wall thickness 1.20 mm) and 60 mm width stiles andrails with lock rail 120 mm.