bids are invited for item number 1 the chair should be green assured validated by tuv india as per sov, tuv-eco-2011 / 008. the seat should be made up of 1.2 ± 0.1cm. thick hot pressed plywood measured as per qa method described in ocp-qlta-p14-18 and upholstered with leather and moulded polyurethane foam. the back foam should be designed with contoured lumber support for extra comfort. back size is 53.0cm. ( w ) x 95.4cm. ( h ) seat size is 54.6cm. ( w ) x 49.0cm. ( d ) . the hr polyurethane foam should be moulded with density = 45 + / -2 kg / m3 and hardness load 16 ± 2 kgf as per is:7888 for 25% compression. the seat and back should be arrested together with spine made of 0.8±0.05 cm thk hr steel and is black powder-coated ( oft 40-60 microns ) . the armrest assy. should be comprised of three parts viz. the armrest support tube and p.u. armrest and the armrest top. the armrest tube assy. is made of 2.54±0.03cm x 0.16±0.0128cm m.s.e.r.w. support tubes and chrome plated. the p.u. armrest should be made of black integral skin polyurethane with 50-70 shore a hardness and reinforced with m.s. insert. the armrest top should be made of abs & upholstered with foam & leather. the mechanism should be designed with the following features: •360° revolving type. •seat back tilting ratio of 1 : 1.5 •front pivot for tilt with feet resting on ground ensuring more comfort. •tilt tension adjustment. •5-position locking with anti-shock back mechanism, which prevents the backrest from impacting the user when the lock should be released. •static seat depth adjustment = 5.0 ± 0.5cm with 5 position locking. the height adjustment should have an adjustment stroke of 9.0 ± 0.3cm. the bellow should be 1 piece and blow moulded in black polypropylene. the pedestal should be made of die-cast aluminium with buffing finish. it should be fitted with 5nos. twin wheel castor. the pedestal should be 67.0 ± 0.5cm pitch-center dia. ( 77.0 ± 1.0cm with castors ) . the twin wheel castors should be injection moulded in black nylon. 2 item number 2 1 ) seat assembly : the cushioned seat should be made of injection molded plastic outer & inner. plastic inner should be upholstered with leatherette and moulded high resilience ( hr ) polyurethane foam of density 45±2 kg / m3, and hardness load 16 ± 2 kgf as per is:7888 for 25% compression. *seat size : 47.0 cm. ( w ) x 48.0 cm. ( d ) 2 ) back assembly: the cushioned back should be made of pu foam with insitu molded ms e.r.w round tube of size 1.9±0.03cm x 0.16 ±0.0128cm. it upholstered with leatherette. back size: 47.7 cm. ( w ) x 60.1 cm. ( d ) visitor tubular frame: the tubular frame should be cantilever type and made of ø2.54± 0.03 cm x 0.02 ± 0.016cm thick ss 202 tube. the back should be connected to frame through chrome plated high pressure die case connector piece. overall dimensions of chair seat height -44.8cm height -98.2cm. width & depth of chair as measured from base - width-60.9 cm and depth-64.2 cm.the product should have bifma level 2 certification. 3 item number 3 overall size : width : 203cm depth : 99cm height : 98cm seating height : 47cm leather / pvc / fabric:pu, pvc , frame material:wood, foam, pu, pvc, sofa spring, flexible belt, pocket spring . seat foam: ( density, type ) :35#hard , back foam: ( density, type ) :35#soft. leg material:wood specifications 4 item number 4 overall size : width : 100cm depth : 99cm height : 98cm seating height : 47cm leather / pvc / fabric:pu, pvc , frame material:wood, foam, pu, pvc, sofa spring, flexible belt, pocket spring . seat foam: ( density, type ) :35#hard , back foam: ( density, type ) :35#soft. leg material:wood 5 item number 5 overall size : width : 100cm depth : 65cm height : 45cmtable legs meterials:color :cherry, table top materials & size : ( tempered glass / 10mm ) , l x w x t : 1000x650x10mm color : clear 6 item number 6 the almirah should have an overall size of 916mm ( w ) x486mm ( d ) x1981mm ( h ) with welded construction. it should have the shelf thickness of 0.7 mm, back thickness of 0.8mm, door thickness of 0.8mm ( high yield strength ) and all other components should have a thickness of 0.9mm. these components should be made of crca ‘d’ grade high yield strength as per is:513. the almirah should have a mazak handle and three way locking mechanism with shooting bolts. it should have a height wise adjustable shelf mounting which should have a uniformly distributed load capacity of max 40 kg. it should also have a m10 screw type leveller with hex plastic base. the finishing should include epoxy powder coated to the thickness of 50 microns ( + / - 10 ) . the product should have greenguard by ul certification. total quantity : 11