bids are invited for supply of capacity of trailer ( gross load ) ( tonnes ) 4 pay load of trailer 3 tonne material used for fabrication of trailer as per clause-5, table-1 of is:8213 ( latest ) yes type of axle assembly ( the capacity of single axle trailers is not more than 5 tonnes ) class-b ( load carrying capacity upto 5 tonne ) overall length of trailers ( shall not exceed 5 m upto 6 tonne load, 6.7m for above 6 tonne load 3.365 meter overall width of trailers between extreme points ( meter ) 1.83 meter overall height of trailers with tyre inflated from the supporting surface to top of platform ( meter ) 0.895 meter overall height of trailers with tyre inflated from the supporting surface to sideboard ( meter ) 1.2 meter ground clearance ( mm ) 300 millimeter axle assembly wheel track ( mm ) 1500 axle assembly dimensions as per table-2 of is:8213 ( latest ) yes hydraulic ram of suitable capacity for tipping facility yes tipping angle ( degree ) 45 single telescopic cylinder as per is:12371 ( latest ) yes tilting of platform without disturbing the trailer yes reto reflective marking ( tapes ) as per ais -090 yes lighting and lighting -signalling device as per ais-062 yes trailers shall be fitted with rear under run protective device ( rupd ) confirming to is 14812 :2005 yes trailers shall have service and parking brake as per ais- 043 yes the trailers shall be fitted with pneumatics tyres and rims of suitable size confirming to is 13154 :1991 and is 10694 :1988 yes number of wheels 2 conformity to standards is 8213:2000 ( latest ) and ais 112 ( latest ) warranty ( in months ) 36 isi marked ismc channel used for fabrication of chassis and frame mounting on chassis yes diameter of the axle of chassis ( min ) ( mm ) 80 millimeter nos. of spring leaves plates fitted ( nos. ) 15 lashing hooks for towing down load yes no of hooks 1 type of towing device hook capacity of towing 3 tonne painted colour on the trailers as per ais 112 red / blue capacity of trailer ( gross load ) ( tonnes ) 3 pay load of trailer 2 tonne material used for fabrication of trailer as per clause-5, table-1 of is:8213 ( latest ) yes type of axle assembly ( the capacity of single axle trailers is not more that 5 tonnes ) class-a ( load carrying capacity upto 3 tonne ) overall length of trailers ( shall not exceed 5 m upto 6 tonne load, 6.7m for above 6 tonne load 2.5 meter overall width of trailers between extreme points ( meter ) 1.5 meter overall height of trailers with tyre inflated from the supporting surface to top of platform ( meter ) 0.7 meter overall height of trailers with tyre inflated from the supporting surface to sideboard ( meter ) 1.2 meter ground clearance ( mm ) 300 millimeter axle assembly wheel track ( mm ) 1500 axle assembly dimensions as per table-2 of is:8213 ( latest ) yes hydraulic ram of suitable capacity for tipping facility yes tipping angle ( degree ) 42 single telescopic cylinder as per is:12371 ( latest ) yes tilting of platform without disturbing the trailer yes reto reflective marking ( tapes ) as per ais -090 yes lighting and lighting -signalling device as per ais-062 yes trailers shall be fitted with rear under run protective device ( rupd ) confirming to is 14812 :2005 yes trailers shall have service and parking brake as per ais- 043 yes the trailers shall be fitted with pneumatics tyres and rims of suitable size confirming to is 13154 :1991 and is 10694 :1988 yes number of wheels 2 conformity to standards is 8213:2000 ( latest ) and ais 112 ( latest ) avaliability of test report fron approved laboratory to prove conforming to specification as per ais 112 yes warranty ( in months ) 36 isi marked ismc channel used for fabrication of chassis and frame mounting on chassis yes diameter of the axle of chassis ( min ) ( mm ) 80 millimeter nos. of spring leaves plates fitted ( nos. ) 15 lashing hooks for towing down load yes no of hooks 1 capacity of towing 2 tonne painted colour on the trailers as per ais 112 red / blue one coat of red oxide and 2 coat of super synthetic enamel paint yes painting on outer side of the tank as approved by the buyer yes