bids are invited for 1 22155514000 6 ea connecting arm along with pin for grab unit of stacking crane in anode handling system as per dwg no. ahs1 / mech / spr / a3 / 10747 note: the pin surface shall be provided with antirust coating and wrapped properly. 2 22155712790 6 ea guide roller assembly for grab close / open of stacking crane in rodding shop-i as per drawing no. rs-i / mech / spr / a1 / 11035 note: bearing shall be provided of fag / skf make only 3 22931080100 4 ea clamping table lever fulcrum axle d.90 x l.358 as per item no.12 of dwg no. rsi / mech / spr / a2 / 11186, sht.3 / 3, rev-1 4 22931080120 6 ea tilting cylinder clevis pin d.50 x l.146 as per item no. 17 of dwg no. rsi / mech / spr / a2 / 11186, sht.3 / 3, rev-1 5 22932020190 10 ea pin head dia.100 x 160 lg for tilting frame of finishing machine as per item no.9 of dwg no.rs-i / mech / spr / a2 / 11115, sh.2 / 2 6 22950061870 2 ea lower tie rod as per item no.5 drg.no.rs / mech / trc / a2 / 7622, rev-1, sheet no.2 / 2 7 22950062060 2 ea front upper axle as per item no.3 drg. no:rs1 / mech / trc / a2 / 7622-rev-1 sheet no.2 / 2, 8 22950062130 4 ea front lower and rear axle item no.2 as per drg. no:rs1 / mech / trc / a2 / 7622-rev1, sheet 2 / 2, 9 22950062200 2 ea upper tie rod as per item no:4 drg. no:rs1 / mech / trc / a2 / 7622-rev-1, sheet no:2 / 2 note: pr item sl no.6 to 9 has to be procured from a single party on overall l1 basis because of the interlinking of matching part. 10 22970911130 2 ea inlet side furnace header nozzle assembly as per item 1, drawing no.rsi / mech / spr / a2 / 11367, moc: ss304 for all parts 1a to 1e. 11 22970911140 2 ea outlet side furnace header nozzle assembly as per item 2, drawing no.rsi / mech / spr / a2 / 11367, moc: ss304 for all parts 2a to 2f. 12 22972070180 5 ea cover tray for pawl bar of rodding bench casting machine in rs-1 as per drawing no. rsi / mech / spr / a2 / 11065, rev-1 item no.1 to 4 13 22972070190 6 ea guide roller assembly for pawl bar carriage as per item no.5 of dwg no. rs-i / mech / spr / a2 / 11463, sh.4 / 4, rev.0 note: - bearings used shall be of skf / fag make only. - the assembly shall be painted with 2 coats of glossy 14 22972070200 6 ea pusher assembly for pawl bar carriage as per sub-assembly.2 of dwg no. rsi / mech / spr / a2 / 11463, sh.3 / 4, rev. 0 note: - bearings used shall be of skf / fag make only. - the assembly shall be painted with 2 coats of glossy 15 23010011340 12 ea door housing and modified axle assembly for h / uh machine of rodding shop-2 as per drawing no. rs-ii / mech / spr / a2 / 11095. 16 23012000630 6 ea roller item no.7 as per dwg no. rs-ii / mech / ga / a1 / 10194, sh-1 / 2 & 2 / 2 17 23012109010 15 ea pin bush assembly for tilting cylinder of bath breaking machine of rodding shop-2 as per drawing no. rs2 / mech / spr / a3 / 15245. 18 23014402810 15 ea pin bush assembly for tilting cylinder of bath finishing machine-1 ( old ) of rodding shop-2 as per drawing no. rs2 / mech / spr / a3 / 15242. 19 23508151780 100 ea roller group outboard assembly for apron conveyor in butt-1 as per drg no.butt / ga / mech / a3 / 4236, sheet 1 and 2, note: 1 ) bearing used in the rollers shall be of skf / fag make only.same will be checked at site and if found to have used bearing of other brands, same will not be accepted. 2 ) fasteners used for the rollers shall be of tvs / gkw / lps / dfl / pfl make only and of ht grade. 3 ) after assembly of the rollers, each of the rollers are to be checked for free rotation. 20 23042101520 300 ea geared cam for stem lock / unlock of bell grab trolley in rs-2 as per drawing no.rs2 / mech / spr / a4 / 9541 21 23086011450 3 ea punch head assembly for thimble press of rodding shop-ii as per drawing no: rod / sp / mech / a3 / 7191. note: 1 ) .the component has to be made froged blank with 100 % tested by x-ray / ultra sound for crack and other defects. 2 ) .relevant govt approved test certificate for the same has to be produced with despatch document. 22 23089044230 15 ea pin bush assembly for tilting cylinder of bath finishing machine-2 ( new ) of rodding shop-2 as per drawing no. rs2 / mech / spr / a3 / 15244, item no.1 to 4