khamnaga to brahamansarangi road for the year 2024-25 - clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 meters including removal and disposal of top organic soil not exceeding 150 mm in thicknessas per direction of engineer-in-charge. 2 providing and applying tack coat with bitumen emulsion (rs-1)at the rate of 0.20kg per sqm on the prepared bituminous surface cleaned with mechanical/manual broom clause 503 of mosrt&h specifications for road & bridge works (4th.revision) a/r,page-168,item no-44 3 providing and laying semidense bituminous concrete with batch type hot mix plant using crushed aggregates of specified grading ,premixed with bituminous binder of 60/70 penetration grade of bitumen ,transporting the hot mix to site ,lying with a hydrostatic pavor finisher with sensore control to the require grade ,lavel & allingiment ,rolling with smooth wheeled ,vibratory & tendem rollers to achive the desire compaction as per cluse 508 of mosrt&h specifications for road & bridge works (4th revision) as per direction of the engineer-in-charge. ,page-175,item no-47 4 providing and laying good laterite moorum for filling road flanks including cost & conveyance of all materials to site and all labour cgarges complete as per e.i.c. 5 reinforced cement concrete m15 grade kilometer stone of standard design as per irc:8 fixing in position including painting & printing etc. as per the drawing &technical specification clause 1703 of mord and as per direction of engineer-in-charge. km stone 6 200 m stone 7 providing and erecting direction and place identification of semi-reflective sign boards as per irc:67 made of 2mm thick m.s.sheet duly stove enamelled paint in white colour in front and grey colour on back with red reflective boarder of 70 mm width and required message, letters,figures with reflective engineering grade tape as per mord specification of required shade and colour. supported and welded on 47mm x 47mm of 12 swg square tube of 3050mm height duly strengthened by 25mm x 5 mmm/s flats iron on edges on back firmly fixed to the ground by means of properly designed foundations with m-15 grade cement concrete 450mm x 450mm x 600mm,600mm below ground level as per approved drawing and technical specification clause 1701. for 600 mm equolateral triangle 8 for 650x450mm rectangle