bids are invited for 1 - m8228575100 ( q3 ) 1 description of store portable led lighting system, inflatable 2 light source :: lamp wattage max :: lumen output min led / 400 / 44000 or led / 400 / 51000 3 fuel tank capacity for continuous running hours of genset at full lighting load ( in hours ) - minimum 10, 12, 14 4 minimum warranty period for complete system ( in months ) 12 5 conformity of the specification for alternator as per genset manufacturers standard 6 conformity of the specification for engine as per genset manufacturers standard 7 availability of valid certificate of type approval for compliance to mass emission norms for gensets yes available 8 availability of valid certificate of conformity of production ( cop ) for compliance to mass emission norms for genset engine yes available 9 compliance with cpcb norms yes. as per gazette notification no. 397 - g.s.r. 535 ( e ) dated 7th august 2013 10 agreed to furnish type approval certificates and cop certificates to buyer on demand yes 11 generator power out put ( in kva ) 1.2 12 type of generator 230 v, 1 phase, 50 hz, ac, 0.8 pf 13 starting type recoil start 14 type of fuel petrol run 15 type of cooling air cooled 16 engine type 4 stroke, 1 cylinder engine 17 engine capacity, minimum ( in cc ) 90-200 18 agreed to furnish engine capacity certificate from engine manufacturers letterhead or arai:: icat report, to buyer on demand yes. agreed 19 type of air filter ( cleaner ) - engine manufacturers certificate to be furnished to buyer on demand any type of air filter 20 life of air filter ( in hours ) any value 21 transport guard on engine yes 22 maximum working hours recommended by engine manufacturer for change of oil ( in hours ) 100 or above 23 base frame and base plate sheet to support for generating set and control gear box yes. provided 24 material of base frame ss tube or ms tube or aluminium 25 material of base plate aluminum sheet or mild steel s.no product details product specifications 26 ms parts powder coated yes 27 thickness of base plate, minimum ( in mm ) 3 28 no of compressors::air blowers with suitable rating ( in nos ) 2 29 provision for fuel level indicator yes 30 speed controller for compressors::air blowers any value 31 inflatable lighting tower capable to provide instant light as a first responder in shortest possible time to illuminate wide area of approx. 10, 000 sq. meters 32 type of tower cylindrical shaped balloon made of suitable nylon or polyester based cloth to ensure light emission with minimum loss 33 material for top cover of balloon moulded fibre glass 34 outside wind speed at which the balloon shall remain erected, maximum ( km::hr ) 40 or higher 35 rain proof inflated tower yes ( cylindrical shape structure ) 36 maximum time taken to inflate the balloon ( in seconds ) 25-60 37 balloon height in inflated condition from ground level 4.5 or 5m 38 lamps mounted inside the balloon at the top end such that it goes up::down while inflating and deflation yes 39 maximun deflation time including repacking time ( in minute ) 5 40 provision of stay wire ropes provided and it can be tied to tower ( balloon ) and grouting hooks in case of extra wind velocity polyester rope with 5m length 41 rope dia ( in mm ) 3 42 no of rope ( nos ) 3 43 no of empty bag for sand 3 44 puncture tape for each tower balloon 3 nos. size: 100 mm x 100 mm 45 type of blower with or without carbon brushes 46 life of blower motor ( minimum, in hours ) 800 or higher 47 provision of switches and indicators blower on / off switch. change over switch. indicating lamp. mcb at ac / dc output. on / off switches 48 degrees of protection for lamp enclosures as per is / iec 60529 ( 2001 ) 49 ip code 55 or 65 50 time duration for minimum lux value ( in sec ) < 5 51 minimum lux value 1 at 55 m radius s.no product details product specifications 52 system also work on ac mains supply yes. works on 220 v / 230 v - 50 hz ac 53 provision for ac main supply 3 pin socket with suitable leaded wire with plugs at both end 54 lamp life , minimum ( in hours ) 50000 55 bis crs compliance for led driver compliant 56 tolerance for dimensions .+ / -20% 57 max total weight of complete system ( excluding fuel, storage box and accessories ) ( kgs ) 45 to 80 kg 58 add on item for each unit 3 nos. spare puncture tape for repair work ( size 100 mm x 100mm ) 59 3 nos. spare empty bags for sand 60 storage box with locking provision 61 rain protection cover 62 storage / dust cover 63 arrangement of trolley provided with suitable material with wheels to move the erected tower within a reasonable distance any value 64 agreed to furnish instruction manuals for installation, operation and maintenance yes 65 agreed to furnish lm 80 and lm 79 reports for led lamps yes 66 availability of test reports from central govt lab or nabl::ilac accredited lab to prove conformity of the specification yes. reports for complete genset including engine, alternator, lighting system, ip protection for lamp enclosures, and all the feature and functional parameter 67 balloon inflation type, self inflating without use of supporting rod yes 68 no of control drivers 1 or 2 or 3 or 4 led driver 69 agreed to furnish all the test reports and certificates to buyer on demand yes 70 special additional requirements 3nos of spare ballon, 1no spare blower, 2nos spare lamps 71 special additional requirements 1. the system should run on the power supply from either in-built generator set or any other external power source 2. lamp should be protected by a wire guard with an arrangement of lamp automatically switch-off when the blowers malfunction total quantity : 4