bids are invited for providing and laying cement concrete flooring 40 mm thick with mis cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30 an x 30 cm or other sine laid diagonally / square etc finishing smooth ( with extra cement ) in any colour as directed and curing etc. complete. 2 providing water proof bedding for flooring of bath and wc 25 mm thick in c.m. 1:3 including using approved water proofing compound in specified proportion as per manufacturers specifications for pa bag of cement including leveling, curing complete. 3 providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without nary finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. 4 providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at i kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 3 mm thick in cement mortar i:4 finishing the surface by taking out grains complete. 5 providing and applying two coats of wall care putty on plastered surface and ceiling and walk to prepare surface even and smooth of approved make, etc. providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by blushing and moaning down etc. complete 7 providing and applying printing coat on concrete / masonry / asbestos cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in three coats including scaffolding, preparing the surface. ( excluding the primer coat ) etc. complete. 9 providing and applying two coats of synthetic enamel paint of approved colour to new / old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface ( excluding primer coat ) etc. 10 providing and fixing factory made panelled door shutter in single leaf 35 mm thick style and rail without ventilator with cctw panels 12 mm thick including wrought iron hold fast and stainless steel fixtures with oil painting 3 coats etc complete i i providing, laying and fixing p.v.c. pipe of 75mm din with all necessary fittings such as bends, tea, reducers. clamps, etc. including jhula, scaffolding ( whatever required ) , removing existing pipe line if necessary and conveying and stacking the same as directed etc. complete. total quantity : 14150