bids are invited for body assy, head end, dwn: a1102.01. 00199 ( item 1 ) , for beetle charger consisting of the following sub assemblies all to be supplied in assembled condition 1.beetle charger body head end drg no:a1 / 101.01.003 / 21459f sh-1 and drg no:a1 / 101.01 .003 / 21460b sh-2 2.quadrant arm r h assembly consisting of quadrant arm rh drg no:102.01.001 / 74 to 75a-1no each beetle roller drg no:102.01.001 / 78, nose cap-a drg no: 102.01.001 / 79, 8 nose cap-b drg no:102.01.001 / 80, 8, spacer drg no:102.01.001 / 81 stud drg no:102.01.001 / 82, locknut drg no:102.01.001 / 8 3 washer drg no:102.01.001 / 84 and timken taper roller bearings 462 / 453-4nos as per ga drg no:102.01.001 / 68 3.quadrant arm lh drg no: 102.01.001 / 71a-1no with all the items given under serial-2 4.pivot pin with square nut drg no:102.01.001 / 29688 item:1, 2-2nos 5.sprin g drg no:102.01.001 / 76-2nos 6.skf thrust bearing no:5113-2nos 7.drawbar assembly as per drg no:102.01.001 / 99-1no consisting of a.dra wbar link drg no:102.01.001 / 104-1no drawbar pin drg no:102.01.001 / 105-1no, drawbar link drg no:102.01.001 / 123-2no head link drg no:10 1.01.007 / 28864a-1no stop block drg no:102.01.001 / 125-1no and item:38, 44 of drg no:102.01.001 / 99 stop block drg no:102.01.001 / 98-4no s with bolts and nuts item:46, 47 of drg no:102.01.001 / 99 link drg no:102.01.001 / 123-2nos with item:44 of drg no:102.01.001 / 99-4nos b ush drg no:102.01.001 / 121a -4nos, bush drg no:102.01.001 / 119a-2nos pin drg no:102.01.001 / 120b-2nos, pin drg no:102.01.001 / 122b-4nos ra ck drg no:102.01.001 / 106a-2nos, roller drg no:102.01.001 / 115-2nos distance piece drg no:102.01.001 / 116-2nos, shaft drg no:102.01.001 / 1 17-2nos dust cover drg no:102.01.001 / 118-4nos, 2.50in internal seegar circlip item:33 -4nos and skf ball bearing rls-9 item:30-4nos o f drg no:102.01.001 / 99, middle body assy, dwn:a1 / 102.01.001 / 99 for beetle charger with compensating rod and drawbar in assembled condition and consisting o f the following items:13 1.middle segment drg no:101.01.007 / 823c 2.spring drg no:102.01.001 / 110-2nos 3.spring tube drg no:102.01.001 / 111-1no 4.compensating rod drg no:102.01.001 / 112-1no 5.compression screw drg no:102.01.001 / 113-1no 6.nut drg no:102.01.001 / 114-1no 7.ms end connector drg no:a3 / 101.01.003 / 21524-1no 8.drawbar link drg no:102.01.001 / 101-2nos 9.drawbar link drg no:102.01.001 / 102-1 no 10.drawbar link drg no:102.01.001 / 103-1no with requisite bolts and nuts as per item:36 of drg no:102.01.001 / 99 11.drawbar rollers drg no:102.01.001 / 108-8nos 12.roller pin drg no:102.01.001 / 109a-4nos with skf nut km5a-8nos item:35 13.skf lock washer mb5b-8nos it em:34 skf ball bearings 6306-8nos with requisite grub screws item:39 of drg no:102.01.001 / 99, body assy, tail end, dwn:a1 / 102.01.001 / 99 for beetle charger with drawbar assembly to be supplied in assembled condition consisting of the following items 1.beetle charger body tail end drg no:101.01.007 / 822d and drg no:101.01.007 / d 824c-1no drawbar links drg no:1 02.01.001 / 101-2nos drawbar link drg no:102.01.001 / 100-1no with rope connecting block drg no:102.01.001 / 107-1no locking plate drg no :102.01.001 / 126-1no with requisite quantities of bolts and nuts item:37 of drg no:102.01.001 / 99 drawbar roller drg no:102.01.001 / 10 8-8nos roller pins drg no:102.01.001 / 109a-8nos with skf nuts km5a-8nos, item:35 skf lock washers mb5b-s-8nos, item:34 skf ball bearing s 6306-s-8nos, item:29 72mm internal seegar circlip item:32-8nos with requisite no of grub screws item:39 of drg no:102.01.001 / 99 total quantity : 3