purchase of equipment (realtime hardware -in-loop(hil) system simulator) , real-time computer 16-core opal-rt op-5707xg (or equivalent) rt computer-based system a) simulator chassis: rack mountable b) target computer: multi core processor,16 core c) supported speed: 3.8ghz (minimum) d) supported ssd: 500 gb (minimum) e) supported dram: 32gb(minimum) f)pcie slots to support third party cots cards g) high speed duplex multi mode sfp optical fiber 1 to 5gbps h) led indicators for synchronization status, target computer status etc i)standard atx computer connectors like usb ports, monitor, network ports etc.. j)shall support lab grade environmental conditions k)integrated patch panels for 16 channels of i/o for monitoring parameters l)one virtex -7 fpga or above to drive the i/o cards m) intel quad port ethernet adapter n) time sync kit oregano , digital input interface no of channel: 64 channel (2 x 32) with optical isolated, 10msps, 40 ns propagation delay, range: 4 – 50v dc, short circuit protected, transition delay of 50 ns , digital output interface no of channel: 64 channel (2 x 32) isolated push-pull, range: up to 30v dc, 50nsec prop delay, galvanic isolated, short circuit protected , analog input interface no of channel: 32 channel (2 x 16) differential, 500 ks/s, 16bits, simultaneous captured range:+/-20v , analog output interface no of channel:32 channel (2 x 16) configurable 16channel 1ms/s 16 bits, 1usec update time range: +/-16v dc, simultaneous generated, short circuit protected , communication interface communication protocols · iec61850 bundle (all) · c37.118 master and slave · dnp3 master and slave / iec 104 (preferred) · modbus master and slave · opc:ua server · opc: da , voltage conditioning module 1xvoltage amplifier 150v-30ma - 4 channels • output voltage: 150v-30ma • no. of channels: 4 • input voltage control range: ±16v •analog bandwidth: 40hz – 1khz •compatible with modular chassis with 8 slots form factor: maximum of 3u, 19” rack mountable with mounting kits and handles , current conditioning module 2xcurrent source 5a-1v • output current: 5a rms • no. of channels: 2 • input voltage control range: ±16v •analog bandwidth: 1hz – 1khz •compatible with modular chassis with 8 slots form factor: maximum of 3u, 19” rack mountable with mounting kits and handles , conditioning chassis quick connection using screw terminal and db37 connectors choice of current or voltage output boards built-in power supply maximum consumption: 500w various conditioning (voltage and current amplifier) modules integrated , host software 1xhypersim / equivalent host node locked , target licences as applicable to rt computer configuration (minimum - 4 core) • 1xhypersim / equivalent target simulation • hypersim / equivalent testview • hypersim / equivalent scopeview • hypersim / equivalent psse import • ehsx64/ equivalent power electronic toolkit