bids are invited for fire suppression system - main cylinder bank complete 180 itrs capacity ccoe approved cylinder filled with min 160 kg of fk 5112/novec 1230 ul listed suppression agent with valve assembly and arrangement for supervisory switch connection for monitoring cylinder pressure, a pressure gauge with a safety burst disc and a safety cap, all as specified and/or directed etc., complete with cylinder brackets (ul listed) main cylinder bank complete electric control head operated electrically from the detection & control system or locally with a manual lever on the control head and other required accessories all as specified and/or directed etc., complete (ul listed) main cylinder bank complete pneumatic actuator with all accessories including actuation pipes, tees and elbows as as specified and/or directed etc., complete (ul listed) main cylinder bank complete flexible discharge hose and manifold check valve to route the novec 1230 agent from the storage cylinders to the discharge piping by a flexible rubber hose with wire braided reinforcements. this hose is connected to the discharge outlet novec 1230 cylinder valve and terminates at the system piping or discharged manifold, all as specified and/or directed etc., complete. (ul listed). main cylinder bank complete pressure switches operated pneumatically from the discharge of agent to control external appliances and other required accessories all as specified and/or directed etc., complete (ul listed) main cylinder bank complete manifold fabricated from seamless pipe pipe (s): ms. seamless to astm a-106, sch. 80 as per list of approved make reserve cylinder bank complete 180 ltrs capacity ccoe approved cylinder filled with min 160 kg of fk 5112/novec 1230 ul listed suppression agent with valve assembly and arrangement for supervisory switch connection for monitoring cylinder pressure, a pressure gauge with a safety burst disc and a safety cap, all as specified and/or directed etc., complete with cylinder brackets (ul listed) reserve cylinder bank complete electric control head operated electrically from the detection & control system or locally with a manual lever on the control head and other required accessories all as specified and/or directed etc., complete (ul listed) reserve cylinder bank complete pneumatic actuator with all accessories including actuation pipes, tees and elbows as as specified and/or directed etc., complete (ul listed), reserve cylinder bank complete manifold check valve to route the novec 1230 agent from the storage cylinders to the discharge piping by a flexible rubber hose with wire braided reinforcements. this hose is connected to the discharge outlet novec 1230 cylinder valve and terminates at the system piping or discharged manifold, all as specified and/or directed etc., complete. (ul listed) reserve cylinder bank complete pressure switches operated pneumatically from the discharge of agent to control external appliances and other required accessories all as specified and/or directed etc., complete (ul listed) reserve cylinder bank complete manifold fabricated from seamless pipe pipe (s): m.s. seamless to astm a-106, sch. 80 as per list of approved make. nozzles for all voids designed to provide the proper flow rate and distribution of clean agent to total flood a hazard area: 180 deg./360 deg as required by the flow calculations all as specified and/or directed etc., complete (ul listed) warning signage to indicate that the area is protected by clean agent and emergency signage all as specified and/or directed etc., complete. c.s./m.s. seamless piping, fittings (forged screwed /socket weld upto 50nb) & m.s. supports e.g. angle, channel, plates clamps, etc. as per astm a-106, sch. 40. as per list of approved make. 2 zone agent release panel with two solonid output. complies with nfpa-72, performing dual function of detection and controlled release of gaseous agent. the panel shall be capable of tripping gas solonoid valve from signal from smoke sensor manual release switch for gas extinguishing systems manual abort switch for gas extinguishing systems multi sensor (smoke and heat combination) detector with base-which is fully compatible with the majority of existing conventional systems. a third terminal provides an integral remote indicator output. ul listed conventional electronic sounder beacon (hooter) supply, fixing and laying of 2 x 1.5 sqmm armoured cable on walls and ceiling and connection to the existing fire alarm system total quantity : 401