tender for c.c. work on road side tracks on both sides from bablu bajpais house to badle miyas well in mohalla kasupet - eartwork in filling in ordinary soil including cartage of earth 3km from site etc all comp 2 providing and laying cement concrete 1:6:12 (1cement:6fine sand:12 graded aggregate 40mm. nominal size) including supply of all materiales, labour & t&p etc. required for proper completion of the work and curing complete also including cost of from work in foundation & floors. as si no – 273 3 construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at omc, and compacting as per technical specification clause 401 4 first class brick work in 1:4 cement and fine sand of 1.25 f.m mortar in foundation and plinth including supply of all materials, labour and t&p etc. required for proper completion of the work as si no. -305(a)and including all labour charges etc complete 5 12mm thick plaster with cement morter in proportion of 1:4cement and fine sand of 1.25 f.m as si no -584 6 construction of un-reinforceed, dowel jointed at expansion and construction joint only, plain cement concrete payment, thickness as desing over a prepared sub base, with 43 grade, cement or any other type as per clause 1501.2.2 m30 (grade) coarse and fine aggregates conforming to is 383 maximum size of coarse aggregate not exceeding 25mmmixed in a concrete mixer or not less then 0.2cum capacity and appropriate weigh batcher using approved mix design laid in approved fixed side lorwork (steel plates including leveling the formwork as per drawing) spreading the concrete with sholves rakes compacted using neddle screed and plate vibrators and finished in continuos opration including provision of contraction and expansion, construction joint applying deboning strips, premer sealment dwell bars, near approaches to bridge/colvert and construction joint admixtures as approved curing of concrete slabs for 14-days using curing compound (where specified) and water finishing to lines and grade as per drawing and technical specification clause 1501 7 supply and fixing of shilapath/signboard i/c all comp.