providing and installation of high lift pumping machineries and other electromechanical accessories for rejuvination of onda sub surface water based piped water supply scheme block onda dist bankura under bankura mechanical division phe dte.- 1 part-a( zone-i cwr site)supply, delivery and storage at site of horizantal split cashing centrifugalpumping machinarywith base plate flexible coupllng, coupling guard, foundation bolt etc. other accessories etc. having the following specification and as per technical specificationsn.b- h-q curve has to be submitted during the delivery(4w+2s)a) discharge : 1243 lpm, total head : 55 mtrs. 2 supply, delivery and storage at site of horizantal foot mounted inducutionmotorsuitable for the pump duty mentioned above (item no 1) with adequate margin including other accessories as per technical specificationsn.b-no load as well as short-circuit test certificate of induction motor during test run has to be submitted during the delivery. motor effencency class:ie4, 4pole 3 supply and delivery at site mccb 630amp capacity 55ka 4 pole thermal magnetic trip with adjustable over load and short circuit etcwith suitable ss encloser 4 supply & delivery at site & storage cidf single door swing check type nrv (p.n.–1.0) rating asper is:5312 part – i, and as per technical specifications(for individual pump) 5 i) dn 100 mm(for individiual delivery header) 6 supply & delivery at site & storage cidf gate valve, rising type (p.n. – 1.0) as per i.s.:14846 – 2000 7 i) dn 150 mm (for sunction side) 8 supply delivery at site and storage of cast iron double flanged (p.n. – 1.6) actuator operated butterfly valve generaly confirming to /ls:13095/1991 & bs-5155 9 i) dn – 300mm (for commn delivery header) 10 supply delivery at site and storage of cast iron double flanged (p.n. – 1.0) actuator operated butterfly valve generaly confirming to bs:5155/ls:13095. 11 i) dn 100 mm (for individiul delivery header) 12 supply, delivery & storage at site m.s flanges, bends, specials, bel mouth, etc. as required to make the installation of suction, delivery and common delivery header of centrifugal pumpingmachineries complete in all respects up to the satisfaction of e.i.c.and as per technical specifications 13 supply, delivery & storage at site mserw (medium) pipefor individual pump suction/delivery line from pump discharge upto common delivery header as per technical specificationsand as per technical specifications 14 supply, delivery & storage at site m.s. fabricated dismantling joints(p.n-1.6 rating) with rubber compression ring and adjustable follower flanged complete assembley with galvinised stud and nuts, as per technical specifications 15 i) dn:150 (for individiual suction line ) 16 ii) dn:100 (for individiual delivery header) 17 iii) dn:300 (for commn delivery header) 18 supply delivery and storage at site of electromagnetic flow meter with remote indicator cum totalizer unit and cable between the meter and indicatoras per technical specification 19 i) dn: 300 (for common delivery header) 20 supply, delivery & storage ofglycerin type pressure gauge,cast al. dial along with dn-15 gi impulse line with valve. 21 i) (0 – 10 kg/cm2.) 102 mm dia for individiual delivery header 22 ii) (0 – 10 kg/cm2.) 150 mm ? for common header 23 supply, delivery & storage ofglycerin type compound gauge, cast al. dial along with dn-15 gi impulse line with valve. 24 i) (+1 – 1 kg/cm2.).) 102 mm ? for individiual suction line 25 supply, delivery and storage at site of following l.t cables 26 i) 240sq. mm3.5 core, 1.1 kv grade, al. xlpe cable conforming to is : 7098 (part – i).(from main switch to pdb cum mcc panel) 27 ii) 25 sq. mm 3 core, 1.1 kv grade, al. xlpea cable conforming to is : 7098 (part – i).a) 6nos motor x 50mtr =300 mtr 28 iii ) 2.5 sq mm , 12 core , 1.1 kvgrade pvc insulatedcopper armoured control cable as per relevent is.a) for 6nos actuater x 25 mtr 29 iv) 16 sq. mm 4 core, 1.1 kv grade, al. xlpea cable conforming to is :7098 (part – i).for mcc to chlorine room 30 v) 6 sq. mm 4 core, 1.1 kv grade, al. xlpea cable conforming to is :7098 (part – i).for dewatering pumpn.b-purchaseofabove all cables should be as per actual site condition. 31 supply, delivery and storage at site 2 mm. thick crca sheet steel enclosed cubical type indoor floor mounted415 volt mcc cum pdb panel with plc having required feeders as per technical specification 32 supply delivery and storage at site of ultrasonic type continuous level measuring unit with provision of 4 to 20 ma analogue signal, indicator and recorder for continuous level monitoring as well as 5 nos. relay out put for sensing high, low, low - low level in suction sump as per specification. 33 supply & delivery at site horizontal type centrifugal self priming non-clog dewatering pump with horizontal type 415v ,50 hz , three phase squirrel cage induction motor including supply of channel base frame ,coupling and coupling guard complete setdischarge capacity : 5.75 m3/hrtotal head : 10 mtr.suction/delivery- 40mm/35mm(1w +1s) 34 supply and delivery at site 40mm dia g.i pipe. with fittings i.e- elbow, union, nipple. g.m wheel valve. gm foot valve etc for making suction and delivery line of dewatering pump. 35 supply, delivery and intallation at site of automatically controlled plunger type chlorinator dosing pump with flow rate0-200 lph and 12kg/cm2 maximum pressure with all accessories including suitable prime over flow rate tank etc.the pump shall be coupled with 2hp motor having 3 phase power and 1440 rpm (±4%).installation is including cost of necessary brick foundation base with net cement finish by supplying all require metrials as per direction of eic.(test certificate and garanty certificate of pump and motor is to be submitted during delivery) 36 design, manufacturing and supply of 2mt capaciy x 8 mtrs span approx x 6.5mtrs. lift singie glrder construct on hand operated over head travelling crane compleie with indef brand triple spur gear chaln puley bock and geared travelling trolley including supply of steel gantry girder wilh 40mm square rail suiable for the above crane for total length of 16 x 2 = 32 mtrs. the bay length shal be 20mtrs. (approx)and suppo(ing disiance for the steel gantry g rdershall be 4.0 mtrs. max. the crafe shall be des gned for class-1 duty indoor operation conforming to ls:807, ls:3177 and ls;3832. the crane and gantry dirder shall be supplied at site duly painted with two coats red lead primer.(test and guarantee certificate have to be supplied at the time of delivery) 37 part-b (zone-i intallation)installation of all items mentioned as in part aincluding supply of all erection items,as required for installation ofcentrifugal pumping machineris, all valves, suctiondelivery pipe line,pdb panel mcc panel, dewatering pump, chlorine system, cable tray, chequred plate, indoor & outdoor light, crane, laying of all cablesincludingsupplying all necessary items i.e- nut &bolt wather rubber gasket, with painting, jointing of cables termination cable soketing by suitable rated sockets, jointing the delivery header withexisting rising main, suporting piller and paining anticorrosive paint etc. including cost ofgas cutting, welding etc. as required for complete installationas per hydraulic standard & ie rules in compliance by engaging skilled technician all complete as per technical specificationand upto entire satisfaction of eic.(except item no-19) 38 supply, delivery fixing at siteg.i cable tray for laying of power cable and g.i perforated cable tray for laying of control cable at sub-station having proper m.s. structural support as per technical specification 39 earthing & lightning protection for pump house,electrical installation etc as per iss and ie rules and as per technical specification . 40 lighting and luminaries arrangement at the head works site including internal illumination ofpump house building etc.as per technical specification 41 supply delivery at site and storage of safety equipment like 6kg capacity fire extinguisher , sand bucket with bracket , rubber mats, shock treatment chart and first aid box,completeas per technical specification. 42 commissioning of the entire installation i.e. pumping machineries,pdb cum mcc panel, actuator, chlorine system, earthing, cable etc. as per direction and to the entire satisfaction of e.i.c. 43 operation including trial run of the entire installation of pumping station, electrical system, chlorination system etc. on 24 hours basis including guarding for a period of 365 days are to be provided with supply of personnel from the date of commissioning.during this period supply of all consumable materials, sundries & lubricants are to be supplied by successful tenderer. 44 part-c (zone-ii cwr site)supply, delivery and storage at site of horizantal split cashing centrifugalpumping machinarywithother accessories etc. having the following specification and as per technical specifications.(3w+2s)n.b- h-q curve has to be submitted during the delivery 45 a) discharge : 1870 lpm, total head : 45 mtrs. 46 supply, delivery and storage at site of horizantal foot mounted inducutionmotorsuitable for the pump duty mentioned above (item no 1) with adequate margin including other accessories as per technical specificationsn.b-no load as well as short-circuit test certificate of induction motor during test run has to be submitted during the delivery. 47 supply and delivery at site mccb 630amp capacity 55ka 4 pole thermal magnetic trip with adjustable over load and short circuit etcwith suitable ss encloser complete set 48 supply & delivery at site & storage cidf single door swing check type nrv (p.n.–1.0) rating asper is:5312 part – i, 49 i) dn 100 mm (for delivery side) 50 supply & delivery at site & storage cidf gate valve, (p.n. – 1.0) as per i.s.:14846 – 2000 51 ii) dn 150 mm (for individual pump sunction site) 52 supply delivery at slte and storage of cast iron double flanged actuator operated butterfly valve generaly confirming to ls:13095/1991 & bs-5155 53 ii) dn – 300mm (for commn delivery header) 54 supply delivery at slte and storage of cast iron double flanged actuator operated butterfly valve generaly confirming to bs:5155/ls:13095. 55 ii) dn 100 mm(for individual pump delivery site) 56 supply, delivery & storage at site m.s flanges, bends, specials,tee, etc. as required to make the installation of suction, delivery and common delivery header of centrifugal pumpingmachineries complete in all respects up to the satisfaction of e. i. c.and as per technical specifications 57 supply, delivery & storage at site mserw (medium)for individual pump delivery line from pump discharge upto common delivery headeras per technical specifications 58 i) dn – 150 (for individiual suction header ) 59 ii) dn – 100 (for individiual delivery header) 60 iii) dn-300 (for commn delivery header) 61 supply, delivery & storage at site m.s. fabricated dismantling joint 62 i) dn – 150 (for individiual suction header ) 63 ii) dn – 100 (for individiual delivery header) 64 iii) dn-300 (for commn delivery header) 65 supply delivery and storage at site of electromagnetic flow meter with remote indicator cum totalizer unit and cable between the meter and indicatoras per technical specification 66 i) dn – 300 (for common delivery header) 67 supply, delivery & storage ofglycerin type pressure gauge,cast al. dial along with dn-15 gi impulse line with valve. 68 i) (0to 10 kg/cm2.) 102 mm dia for individiual delivery header 69 ii) (0to 10 kg/cm2.) 150 mm dia ? for common delivery line 70 supply, delivery & storage of 102 mm dia glycerin type compound gauge,cast al. dial along with dn-15 gi impulse line with valve. 71 i) (+1 to – 1 kg/cm2.) 102 mm for individiual suction line 72 supply, delivery and storage at site of following l.t cables 73 i) 185 sq. mm 3.5 core, 1.1 kv grade, al. xlpe cable conforming to is : 7098 (part – i).from main switch to pdb 74 ii) 35 sq. mm 3.5 core, 1.1 kv grade, al. xlpea cable conforming to is : 7098 (part – i).a) 5nos motor x 50mtr =250 mtr 75 iii) 2.5 sq mm , 12 core , 1.1 kvgrade pvc insulatedcopper armoured control cable as per relevent is.a) for 5nos actuator x 30mtr 76 iv) 6 sq. mm 4 core, 1.1 kv grade, al. xlpea cable conforming to is : 7098 (part – i).for 2 nos dewatering pump 77 v) 16 sq. mm 4 core, 1.1 kv grade, al. xlpea cable conforming to is : 7098 (part – i).for chlorine room 78 supply, delivery and storage at site 2 mm. thick crca sheet steel enclosed cubical type indoor floor mounted415 volt mcc panelhaving required feeders as per technical specification 79 supply delivery and storage at site of ultrasonic type continuous level measuring unit with provision of 4 to 20 ma analogue signal, indicator and recorder for continuous level monitoring as well as 5 nos. relay out put for sensing high, low, low - low level in suction sump as per specification. 80 supply & delivery at site horizontal type centrifugal self priming non-clog dewatering pump with horizontal type 415v ,50 hz , three phase squirrel cage induction motor including supply of channel base frame ,coupling and coupling guard complete setdischarge capacity : 5.75 m3/hrtotal head : 10 mtr.suction/delivery- 40mm/35mm(1w +1s) 81 supply and delivery at site 50mm dia g.i pipe. with fittings i.e- elbo, union, nipple. g.m wheel valve. gm foot valve etc for making suction and delivery line of dewatering pump. 82 supply, delivery and intallation at site of automatically controlled plunger type chlorinator dosing pump with flow rate0-200 lph and 12kg/cm2 maximum pressure with all accessories including suitable prime over flow rate tank etc.the pump shall be coupled with 2hp motor having 3 phase power and 1440 rpm (±4%).installation is including cost of necessary brick foundation base with net cement finish by supplying all require metrials as per direction of eic.(test certificate and garanty certificate of pump and motor is to be submitted during delivery) 83 design, manufacturing and supply of 2mt capaciy x5 mtrs span approx x 6.5mtrs. lift singie glrder construct on hand operated over head travelling crane compleie with indef brand triple spur gear chaln puley bock and geared travelling trolley including supply of steel gantry girder wilh 40mm square rail suitable 28 mtrs. the bay length shal be 2omtrs.(approx)and suppo(ing disiance for the steel gantry g rdershall be 4.0 mtrs. max. the crafe shall be des gned for class-1 duty indoor operation conforming to ls:807, ls:3177 and ls;3832. the crane and gantry dirder shall be supplied at site duly painted wlth two coats red lead primer.(test and guarantee certificate have to be supplied at the time of delivery) 84 part-d(zone-ii installation) 85 installation of all items mentioned as in part-c including supply of all erection items,as required for installation ofcentrifugal pumping machineris, all valves, suctiondelivery pipe line, panel mcc panel, dewatering pump, chlorine system, laying of cable, cable tray, indoor & outdoor light & fan, crane,includingsupplying all necessary items i.e- nut &bolt wather rubber gasket, with painting, jointing of cables termination, cable soketing by suitable rated sockets, jointing the delivery header withexisting rising main, suporting piller and paining anticorrosive paint etc. including cost ofgas cutting, welding etc. as required for complete installationas per hydraulic standard & ie rules in compliance by engaging skilled technician all complete as per technical specificationand upto entire satisfaction of eic. exept item no-46 86 supply, delivery fixing at siteg.i cable tray for laying of power cable and g.i perforated cable tray for laying of control cable at pump house and sub-station having proper m.s. structural support as per technical specification 87 earthing & lightning protection for pump house, and electrical installation as per iss and ie rules and as per technical specification . 88 lighting and luminaries arrangement at the head works site including internal illumination ofpump house building, chlorinre room .as per technical specification 89 supply delivery at site and storage of safety equipment like 6kg capacity fire extinguisher , sand bucket with bracket , rubber mats, shock treatment chart and first aid box, complete as per specification. as per technical specification 90 commissioning of the entire installation i.e. pumping machineries, pdb cum mcc panel, actuator, chlorine system, earting system, cable etc. as per direction and to the entire satisfaction of e.i.c. 91 trial operation of the entire installation of pumping machineris, chlorination system,on 24 hours basis including guarding for a period of 365 days are to be provided with supply of personnel from the date of commissioning.during this period supply of all consumable materials, sundries & lubricants are to be supplied by successful tenderer. 92 add: 12% gst 93 add: 1% cess