modification of junction box for three nos 6.6kv, 1800 kw cw p p motor of unit 6 with fabrication and fixing of different hardware items- fabrication & fixing of bottom plate of motor line side top area terminal box, made of stainless steel / insulated sheet, 33kv class along with provision for fitment of three nos cable entry gland ( round ) , 11kv class as per sample at proper position. 3 supply and fixing of new three nos cable entry gland, round shaped 11kv classas per sample for laying 120sq.mm cu flexible through. 4 fabrication & supply of new hv motor enclosure box, with similar width & breath of existing jb, details specification in annexure-1 5 fabrication & fixing of top plate of new hv motor enclosure, made of ss / insulated sheet, 33kv class along with provision for fitment of 03 nos cable entry gland, 11kv classat position. 6 supply and fixing of new three nos cable entry gland, 11kv classas per sample for laying 120sq.mm cu flexible through. 7 fabrication & fixing of flexible conductorline sideht glass covering power cable in phase including fixing at overhung portion with silver blazing, insulation, cu lead, cu socketing ( cable specs: 120sq, m m flexible copper cable, 33kv volt.12.20 m length in total including lead & socket ( each ) 8 supply and fixing of new support insulator ( 11kv class ) at new motor junction box for holding three nos cu bus bar as per sample 9 supply and fixing of 3 phase 11kv bus bar arrangements for incoming & outgoing cable, electrolytic cu as peris -1897, bus bar size: 50 mm ( width ) x 12 mm ( thick ) , length-300mm. 1000a capacity each 10 fabrication of proper g.i structure for verting mounting of jnction box at height of 2 meter from concrete surface with minimum two nos earthing option, lifting hook etc and fixing upon surface by fastners => limited