bids are invited for executive main table - the main table shall be of size 2400 width mm x 900 mm depth x 750 mm height. top surface of the table shall made up of mdf (medium density fibre ) board duly finished with veneer and final coating of pu. the main desk should contain in built key board pull out tray for keeping keyboard of computer. the front modesty panel of the table shall be made up of mdf board of size 1640 mm x 600 mm x 16mm which shall also be duly finished with veener and pu coating. the side shall be of size 1200mm width x 445mm depth x 660 mm height.( item specification as specify in boq) , executive main chair - providing & placing in positin high back chair.the seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with leather and moulded polyurethane foam. the back shall be designed with contoured lumber support for extra comfort. the armrest top shall be made up of abs & upholstered with foam & leather. it shsall have front pivot synchro tilt mechanism.( item specification as specify in boq) , executive mid back chair - providing & placing in position mid back chair.the seat shall be made up of 1.2 +/- 0.1 cm thick hot pressed plywood & upholstered with leather and moulded polyurethane foam. the back shall be designed with contoured lumber support for extra comfort. size of back shall be w-53cm, h-73cm & size of seat shall be w-54.6cm x d-49cm. overall dimensions of chair shall be, width of chair - 77cm, depth of chair - 77 cm as measured from pedestal below. height of back from ground - min 99.4 to max 111.4 cms. seat height - min 43.4cm to max 55.4 cm. ( item specification as specify in boq) , executive sofa - providing and placing in place of 3 seater sofa of dimensions 1820mm l x 920mm d x 890mm h. seat height shall be 470mm. the upholstery shall be 1.2mm thickness pure leather at all touch points and 1mm thick synthetic leather at other places. the frame shall be made from combinaton of plywood and solid wood. pl