supply of hostel furniture , visitor chair: is over all dimensions: w 535 x d 595 x h 820 mm seat height 460mm. seat size: 420 x 420 mm approx. back size: 420 (w) x 270 mm (h) approx. material: the seat and back shall be made up of l0 mm thick hot pressed water commercial plywood, upholstered with fabric and moulded polyurethane foam (40 mm thick with density 40-50). tubular frame: the main frame shall be cantilever type reinforced at the bends to give cushioning effect and added strength and made of dia 25mm x 14 gauge ms tube. tubular armrest shall be made single piece pu foam reinforced with ms plate.finish: all steel components shall be epoxy powder coated; pre-treatment of surface. (overall appearance of the product shall be as per photograph no.1). , m.s. pipe cots: supply of powder coated cots of size-6’x3’ h-16” frame in 1.5”x 1” pipe of 18 gauge , legs and head & leg foot rest 1.5” dia pipe of 18 gauge, vertical head & leg support pipe 6 nos of 0.75” dia of 20 gauge, frame support pipe 4 nos. of 1”x1” of 20 gauge, leg support pipe 2 nos of 1”x 1” of 20 gauge, ply 12 mm thick isi mark water proofing and ht of head & foot 16” & 10” respectively above ply. all steel components shall be epoxy powder coated; pre-treatment of surface. overall appearance of the product shall be as per photograph no.2). , chair for students : frame made from 20mm 16 gauge round ms pipe welded with 18 gauge perforated sheet for seat & back. without handle. all steel components shall be epoxy powder coated; pre-treatment of surface. seat ht: 18”, back ht: 30”, seat size: 16” x 17” (front side half round), back size: half round 16” x 8” (overall appearance of the product shall be as per photograph no.3). , wooden conference table :size : 3000 w x 1200 d x 750 h (mm) work topis made up of 36 mm thick ply with 1 mm thick laminated table top finished with 2 mm thick pvc edge bending with 02 nons. access flap up box of 300 x 120 mm is fitted on work top. hollow legs 150 mm wide made of 18 mm thick ply with 1 mm thick laminated finished with 2 mm thick pvc edge bending. modestry is made 18 mm ply with 1 mm thick finished with 2 mm thick edge bending.(overall appearance of the product shall be as per photograph no.4). , chairs of conference table: chair type – non revolving and non tilting chair with armrest. chair frame type: cantilever, elliptical pipe 15 x 33 mm of 16 gauge. chrome platted.seat & back rest type – padded seat & back – upholestery –latheritte i.e. 0.7 to 1.5 mm thick polyurethane foam thickness used in seat.minimum seat height from floor – 495 mm +/- 5 mm.minimum depth of seat - 500 mm +/- 5 mm. minimum width of seat - 500 mm +/- 5 mm.minimum width of backrest from seat - 560 mm +/- 5 mm. (overall appearance of the product shall be as per photograph no.4).