structural repairs to dauji temple at hathras as per tender document; 1 demolishing brick work in cement mortar manually including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge. ( rate including gst ) . 2 demolishing lime concrete manually / by mechanical means and disposal of material within 50 metres lead as per direction of engineer-in-charge. ( rate including gst ) . 3 dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.as per direction of engineer - in- charge. ( rate including gst ) . 4 taking out / dismantling stone slab roofing over wooden karries or r.c.c. battensdismantling karries and battens to be paid for separately ) , including stacking of erviceable material and disposal of unserviceable material within 50 meters lead. ( rate including gst ) . 5 taking out wooden struts and, wooden karries including stacking within 50 metres lead. as per direction of engineer - in- charge. ( rate including gst ) . 6 dismantling marble flooring in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. as per direction of engineer - in- charge. ( rate including gst ) . 7 removing of old damaged m.s. iron teen shade etc. including disposal of unserviceable material within 50 metres lead as directed by engineer-in-charge. ( rate including gst ) . 8 removing / scrapping oil paint by manualy labour from walls of temple campus etc. complete. ( rate including gst ) . 9 provision for removal of grass, vegitation & racking out of joints for graouting and water titting work at top of parapet wall and roof for sefty of rainy water etc. ( rate including gst ) . 10 taking out old and damaged m.s. iron channel gate of size 2.00m x 2.40 m and refixing after minor repairing with welding etc. complete. ( rate including gst ) . 11 earth work in excavation by mechanical means ( hydraulic excavator ) / manual means over areas ( exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan ) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge. ( rate including gst ) . 12 providing & laying in position lime concrete with brick aggregate 25 mm nominal size & 50% composite lime mortar 1:1:1 ( 1 u.lime : 1 shurkhi : 1 c. sand ) including supply of all materials labours t&p etc. required for proper completion of work. ( rate including gst ) . 13 filling available excavated earth ( excluding rock ) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. ( rate including gst ) . 14 providing and fixing 40 mm av. thick red sand stone slab for roofing over wooden arries or r.c.c. battens or structural steel sections ( karries or battens or structural steel sections to be paid separately ) , including pointing the ceiling joints with lime mortar 1:1:1 ratio ( 1 lime: 1 c.sand : 1 surkhi of ist class of bricks ) complete : ( rate including gst ) . 15 providing laying 25-30mm lime plaster on the wall / roof with lime mortar 1:1:1 ( 1 lime, 1 surkhi, 1 c sand ) mixed with binding material including supply of all materials labour t&p. e.t.c required for proper completion of work. ( rate including gst ) . 16 50 mm thick fine dressed buff stone flooring over 20 mm ( average ) thick base of lime mortar 1:1:1 ( 1 cement : 1 coarse sand ) , including pointing with lime mortar with an admixture of pigment to match the shade of stone. ( rate including gst ) . 17 errecting tubelor departmental scaffolding for work at outer side, ground level to top of parapite wall at temple including dismantling after completion of work at site. ( rate including gst ) . 18 providing and laying in position cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) . of specified grade excluding the cost of centering and shuttering. as per direction of engineerin- charge. ( rate including gst ) . 19 brick work with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 ( 1 cement : 6 coarse sand ) as per direction of engineer-in-charge. ( rate including gst ) . 20 p / l d.p.c. 50mm thick with cement concrete 1:2:4 ( 1 cement : 2 c. sand : 4 stone aggregate 20mm nominal size ) on plinth level. as per direction of engineer-incharge. ( rate including gst ) . 21 brick work with common burnt clay f.p.s. ( non modular ) bricks of class designation 7.5 in above plinth level up to approximate height 1.00 mtr. in all shapes and sizes in cement mortar 1:6 ( 1 cement : 6 coarse sand ) as per direction of engineer-in-charge. ( rate including gst ) . 22 providing m.s. iron gate size 3.00x1.50 made of ( 50x50x6 ) mm angle iron frame with 12mm. square bars having 15 cm. spikes at top placed at 7.50 cm. center to center rough to required shape and grill size 3.00x0.75mt. made of ( 50x50x6 ) mm angle iron frame with 12mm. square bars having 15 cm. spikes at top placed at 7.50 cm. center to center , 2 nos. 30 cm. long holdfast with nut bolt etc. required for proper completion of work. ( rate including gst ) . 23 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level :1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) . ( rate including gst ) . 24 15 mm cement plaster on the brick wall of mix 1:4 ( 1 cement: 4 coarse sand ) as per direction of engineer-incharge. ( rate including gst ) . 25 painting with synthetic enamel paint of approved brand and manufacture required colour to give an even shade : two or more coats on new work complete. as per direction of engineer-in-charge. ( rate including gst ) . 26 finishing walls with acrylic smooth exterior paint of required shade : ( two or more coat ) . ( rate including gst ) . 27 removal of collected malwa and debries from the monument to outside of municipality limits ( as directed by the engineer - incharge ) using manual labour and tractor trolly ( lead up to 1.50 km av. and lift up to 1.5m av. ) . ( rate including gst ) . 28 providing and laying 2 to 3mm thick lime punning over plastered surface in lime mortar 1:2 ( 1 u. lime, 2 marble dust ) including cleaning and rubbing of old surface before lime punning. ( rate including gst ) . 29 surface dressing of the ground level and inequalities not exceeding 30 cm deep as directed by engineer-in-charge. ( rate including gst ) . 30 providing and fixing plywood board panel with wooden frame, size 0.90x1.20m. including hinges channel, locks, mica sheet, screw, gully patch, and necessary required materials etc. complete. with labour material. ( rate including gst ) . 31 providing and laying lime concrete with brick aggregate 25 mm nominal size ( old brick available at site for prepare brick aggregate ) with 50% composite lime mortar 1:1:1 ( 1 u.lime : 1 shurkhi : 1 c. sand ) including supply of all materials labours t&p etc. required for proper completion of work. ( rate including gst ) .